Elementum 3D first to commercialize NASA’s breakthrough high-temp AM superalloy GRX-810

Elementum m 3D is pleased to announce the official commercial release of GRX-810. This printable nickel cobalt chromium oxide dispersion strengthened (ODS) superalloy was first developed by Dr. Tim Smith and team at NASA Glenn Research Center and is now commercially available from Elementum 3D through a co-exclusive licensing agreement. Elementum 3D shipped the first commercially produced GRX-810 material to a customer on October 31st and has capacity in place for production of 1½ tons of GRX-810 per week. With this advancement, NASA’s goal to quickly accelerate the adoption of GRX-810 to benefit U.S. technologies is ahead of schedule. 


“I’m proud of how the Elementum 3D team rallied to quickly bring NASA’s GRX-810 alloy to market. Development of a qualified manufacturing process to mass produce GRX-810 in six months is a testament to our ability to turn concepts into reality,” said Dr. Jacob Nuechterlein, Elementum 3D CEO and Founder.


This achievement is welcoming news for engineers eager to take advantage of the exceptional material properties offered by GRX-810 combined with the design complexity enabled by additive manufacturing. Potential breakthroughs enabled by this printable material include lighter and thinner engine parts, increased fuel efficiency, lower operating costs, increased durability, and higher operating temperature capability. Manufacturers in aerospace, space, and energy are particularly interested in this groundbreaking 3D printable high-temperature superalloy material.


At high temperatures GRX-810 offers 1,000-fold better creep resistance with a two-fold increase in strength and oxidation resistance compared to other available printable superalloys. The chart below provides typical performance data from NASA and Elementum 3D for powder bed fusion laser beam (PBF-LB) printed GRX-810. 

Creep life is the duration a material can withstand continuous stress at high temperature without failure. Creep is a primary failure mechanism for parts at high temperatures subjected to loads from centrifugal forces, gravity, pressure, or other long duration stresses and so enhanced creep performance can directly lead to longer part life and higher operating temperature and load capability.


For more information about Elementum 3D and its product offerings, please visit www.elementume3d.com or contact sales@elementum3d.com.

 

Elementum 3D receives AS9100D certification

Elementum 3D is pleased to announce the successful achievement of the AS9100D certification!


The Aerospace Quality Management System AS9100D certification provides customers from a range of industries with the highest assurance about the systems and processes in place to ensure Elementum 3D will meet their requirements.


“Achieving AS9100 certification is a testament to the growth of our team and capabilities over the past decade. This certification is part of Elementum 3D’s strategic growth plan to expand our support of future aerospace industry additive manufacturing initiatives,” said Elementum 3D CEO and Founder, Dr. Jacob Nuechterlein.

Receiving the certification towards the internationally recognized standards AS9100D and ISO9001/2015 further opens Elementum 3D’s powder production, development, and services to the aerospace industry. These standards focus on the systems necessary, to consistently provide quality products, processes and services specifically for aviation, space and defense industries which are among the highest risk and most regulated business sectors in the world.

 

“Simultaneously achieving accreditation from internationally recognized quality management systems AS9100D and ISO9001/2015 is a major milestone for our growth. The success of the vigorous Quality Management System (QMS) audit was accomplished with a unified team commitment to excellence,” said Tammy Stadille, Elementum 3D Quality Manager.



While the AS9100D and ISO9001/2015 certifications are not required by law, abiding by the standards set in the certification is universally considered to be a best practice among those in the industry, and puts those who hold it in a network with other certified manufacturers and designers. It ensures that those working with the certification work tirelessly to deliver the highest quality parts and the best results. Elementum 3D has been certified and recertified in the ISO9001/2015 since 2019.


The AS9100D seeks to guide five core processes in the aerospace industry: quality management systems, management responsibilities, resource management, product realization, and measure of improvement. In doing so, it ensures a uniform compliance among different businesses. The certification process for AS9100 is extensive, requiring two on-site audits, numerous internal audits, and annual surveillance audits to ensure that the standards are kept in place. Part of this certification includes an array of measures that change from year to year to ensure continuous compliance. This means that as times change, we continue to operate at the highest degree.

 
 

Who do you think should win in each category? Voting ends December 13.


Elementum 3D is proud to be nominated for Material Company of the year.


 


Elementum 3D’s A6061-RAM2 makes Space flight history with NASA JPL’s Jupiter ice moon exploration 

Congratulations to NASA’s Jet Propulsion Laboratory (JPL) on a successful Europa Clipper launch. This is a monumental milestone for humankind, additive manufacturing, and Elementum 3D. As The Europa Clipper travels towards Jupiter's moon Europa, a topology-optimized bracket made from A6061-RAM2 will be on board ready to support NASA’s mission. The bracket was 3D printed at JPL on their EOS M290 printer. 


The Europa Clipper will arrive in 2030, study the frozen moon's hidden ocean, which is locked beneath an icy shell, and look for key signs of habitable conditions. These signs include water, organics (essential chemical building blocks), chemical energy sources under the surface, and evidence of stable conditions, according to NASA. In addition, the orbiter will determine how habitable the ocean is and whether it could potentially support life. 


The Europa Clipper is the biggest-ever interplanetary spacecraft in history. Once it spreads its solar arrays, the orbiter will measure around 100 feet (30 meters) wide — bigger than a basketball court. It is about 16 feet (5 m) high, according to NASA. The giant arrays are needed to collect solar energy to power the craft when it arrives at Europa, which is about 470 million miles (760 million kilometers) from the sun. 


The spacecraft flight plan consists of swinging close to Mars for a "gravity assist" in February 2025, before heading back to Earth to slingshot around our planet in December 2025 to make its way to Jupiter. It will reach the colossal planet and its moons in June 2030. 

The Europa Clipper findings could give scientists clues about where to spot potential life across the universe and Elementum 3D is proud to support this historical mission. 

 
 

Vistage recognizes Dr. Jacob Nuechterlein with a 2024 Impact Award

 

Elementum 3D’s founder and president, Dr. Jacob Nuechterlein, was recently named the recipient of a 2024 Impact Award by Vistage, the world’s largest CEO coaching and peer advisory organization for small and midsize businesses. The Impact Award recognizes the remarkable development and achievement of trailblazing leaders. From business growth to leadership development, dedicated leaders reach significant heights within their first years as Vistage members, with lasting impact on their company, peers and community.

 

As a supplier and developer of leading-edge additive manufacturing (AM) materials since 2014, Jacob has vigilantly preserved the company’s mission of expanding access to previously impossible AM materials. “I have always been attracted to finding ways to directly impact lives, it’s the driving force behind the success of a company that is revolutionizing the future of manufacturing through additive manufacturing (3D printing). My involvement with Vistage has further widened Elementum 3D’s capabilities. The knowledge and support I have gained every month has been invaluable,” said Jacob Nuechterlein

 

With Jacob’s leadership, the company introduced the first AM metal material to be qualified by NASA/JPL, which are printing components for the Europa mission. Elementum 3D also supplies aluminum alloys to Formula 1 used in engine components that win races and for advanced federal and commercial rocketry technology. Furthermore, their technology is used in antennas for GPS satellites that help people navigate around the world.

 

“It is a tremendous honor for me to work with Jacob as his Executive Coach and Vistage Chair. Through his leadership, Jacob and his amazing Elementum3D team have changed the landscape of metal 3D printing. In a short time, they've literally changed the speed of technology in areas ranging from battlefields to rocket boosters to formula race cars, and many things in between. Yet more important is the impact he's made on his family, employees, and his community. Congratulations on this outstanding and well-deserved award, Jacob!”

-Lori Halverson, Vistage Chair  

 

About Vistage Worldwide, Inc.

Vistage is the world’s largest CEO coaching and peer advisory organization for small and midsize businesses. For more than 65 years, we’ve been helping CEOs, business owners and key executives solve their greatest challenges through confidential peer groups and one-to-one executive coaching sessions. Today, more than 45,000 members in 35 countries rely on Vistage to help make better decisions for their companies, families and communities. The results prove it: Vistage CEO members grew their annual revenue on average by 4.6% in 2020, while nonmembers with comparable small and midsize businesses saw revenue decrease by 4.7%, according to a study of Dun & Bradstreet data. Learn more at vistage.com.

 

Elementum 3D

400 Young Court, Unit 1, Erie, Colorado

720-545-9016

www.elementum3d.com

 
 
 
Facebook  Twitter  LinkedIn  YouTube