August 7, 2025

Time to Read: 5 Minutes


CAM Joke of the Week

Why did the toolpath get kicked out of the bar?

Because it kept crashing into things.


Industry Intel

Made in America: Apple’s $100B Pledge Wins Trump’s Praise - Apple announced a new $100 billion domestic manufacturing pledge, pushing its total U.S. investment to $600 billion, as President Trump spotlighted the move to bolster reshoring and potentially ease looming tariff threats.


Are U.S. Manufacturers Ready to Welcome the Reshoring Boom? - As trade policy shifts and tariffs reshape global sourcing, U.S. manufacturers are racing to rebuild domestic capacity but, face critical hurdles like labor shortages, aging infrastructure, and high automation costs that threaten to stall the reshoring rush.


3,200 Boeing Defense Union Workers Strike Over Contract Dispute - Around 3,200 IAM‑represented machinists at Boeing’s defense sites in Missouri and Illinois walked off the job on August 4, 2025, rejecting a contract with wage and scheduling provisions they say shortchange longtime employees and threaten critical military aircraft production.

Industry Growth (Open Jobs)

A few hot openings across the industry this week:


CNC Machinist/Milling Process Technician - Rapid Precision Manufacturing, INC. (RPM) - Britton, SD


CNC Programmer - CNC Swiss - Binks US LLC - Shoreview, MN


CNC Mill Programmer and Lathe Set Up Operator - K Manufacturing - Maple Grove, MN


Tooling/CNC Machinist - Programmer & Tech - YMI Industries, LLC - Grand Forks, ND


CNC Operator (3rd Shift) - Parker Hannifin Corp. - Kearney, NE


CNC Machinist/Programmer - Applied Industrial Technologies - Lenexa, KS


CNC Machinist - Aerotek - St. Louis, MO

CAM TIP OF THE WEEK (Powered by GibbsCAM)

Tech Tip: Speed Up Hole Machining With Hole Manager


This week’s Tech Tip shows how to simplify complex hole machining using GibbsCAM’s Hole Manager—even for angled and 5-axis parts. Learn how to automatically detect, group, and machine holes with precision and efficiency. If you’re still manually drilling, this video will change your workflow for good.


Trade Show & Event Radar

Date

Show

Location

Sept 8-11, 2025

Fabtech

Chicago, IL

Sept 23-25, 2025

SteakFest Open House

Plymouth, MN

Oct 7-9, 2025

Westec

Anaheim, CA

Oct 19-21, 2025

Wichita Industrial Trade Show

Wichita, KS

Oct 21-22, 2025

MD&M Midwest - Advanced Manufacturing Minneapolis

Minneapolis, MN

Ask a CAM Pro

Q: What’s the best way to set up work offsets for multiple parts?

Tim Trzil

Applications Engineer

There’s no one-size-fits-all approach, but the goal never changes: fast, clear, repeatable setups. The right strategy depends on your machine, your fixture layout, and how many parts you’re running.


Option 1: Multiple Work Offsets (G54, G55, G56, etc.)

This is the go-to for tombstones, fixture plates, or vises in a row. Each station gets its own WCS. Program the part once, then shift and repost it to new origins. It’s clean, easy to debug, and perfect for re-running individual parts without affecting the entire program.


Option 2: One Offset with a Grid Layout

If all your parts are spaced evenly, you can use a single work offset and shift the toolpath in X and Y using a pattern.

It’s simple and efficient, as long as your spacing is consistent.


Option 3: Probing with Macros

For castings or any setup where part placement may vary, probing each part in-cycle is a smart move. You can combine probing routines with macros to dynamically update offsets before machining begins. This works especially well in automation-heavy environments where precision and adaptability are both critical.


Bonus Tip: Label Everything Clearly

Do not rely on memory. Mark fixtures with G54, G55, and so on using engraving or even a Sharpie. Keep a setup sheet with photos and labeled WCS locations. This saves time and prevents costly mistakes when jobs are repeated or handed off to someone new.


Bottom line: The best offset method is the one your team can execute reliably. Whether it involves multiple fixture offsets or a single calculated origin, the key is consistency from setup to cycle start.


Have a programming question?


Send it in for the next edition of Ask a CAM Pro!

 

CAMedy Central