September 18, 2025

Time to Read: 5 Minutes


CAM Joke of the Week

Why did the CNC machine go broke?

Because it kept working for chips.

Industry Intel

Manufacturer Confidence Climbs After Tax Bill, But Headwinds Remain – Confidence among manufacturers rose to 65% in Q3 following new tax legislation, yet challenges like trade uncertainty, rising material costs, and healthcare expenses continue to weigh heavily on the industry’s outlook.


US Factory Output Surprises with Uptick in August — Auto Production Leads the Way – August 2025, U.S. manufacturing output climbed 0.2%, defying forecasts, with a strong rebound in motor vehicle & parts production (+2.6%) and gains in nondurables. While some sectors like machinery and fabricated metals slipped, the year-over-year rise of 0.9% shows industrial resilience despite tariff pressures.


STEM Discovery Night Kicks Off National Manufacturing Week – On October 2 in Columbus, IN, STEM Discovery Night will launch National Manufacturing Week with hands-on exhibits including robotics, virtual and augmented reality, AI, and advanced fabrication. Students, families, and manufacturers will connect over innovation and explore how high-tech tools are shaping modern manufacturing.

Industry Growth (Open Jobs)

A few hot openings across the industry this week:



CNC Programmer - Binks US LLC - Shoreview, MN


CNC Programmer (Lathe) - Staffing Agency - Minnetonka MN


CAM Machinist 3 - Flowserve Corporation - Hastings, NE


CNC Setup & Machinist (Evenings) - C & C Manufacturing Inc. - Brandon, SD


GibbsCAM CNC Programmer (Remote Possible) - Atlas Aerospace - Wichita, KS


CNC Machinist - Buffco Engineering, Inc. - Mulvane, KS


CNC Programmer - Staffing Agency - Fenton, MO

CAM TIP OF THE WEEK (Powered by GibbsCAM)

Tech Tip: Use the Feature Manager For Fast & Easy Surface Selection

Tired of re-selecting surfaces over and over? In this video, we show you how to use the Feature Manager to simplify face selection, save time, and keep your workflow smooth. You’ll learn how to create, name, and color features, quickly recall them for toolpathing, and even modify them on the fly.

Featured Training & Events

This hands-on course introduces the fundamentals of GibbsCAM, including navigation, geometry creation, tool development, and 2.5D milling. Students will learn to create and edit toolpaths, work with solids, and build a strong foundation in CAM programming.




This hands-on course provides a comprehensive introduction to GibbsCAM, focusing on turning operations. Students will learn navigation, geometry creation, tool development, toolpath editing, and working with solids in a 2.5D environment to strengthen programming skills.

Trade Show & Event Radar

Date

Show

Location

Sept 23-25, 2025

SteakFest Open House

Plymouth, MN

Oct 1, 2025

GibbsCAM 2026 Rollout & Vendor Event

Brooklyn Park, MN

Oct 7-9, 2025

Westec

Anaheim, CA

Oct 22, 2025

GibbsCAM 2026 Rollout

Wichita, KS

Oct 21-23, 2025

Wichita Industrial Trade Show

Wichita, KS

Oct 21-22, 2025

MD&M Midwest - Advanced Manufacturing Minneapolis

Minneapolis, MN

Nov 11-12

Modern Machine Shop - Top Shops

Charlotte, NC

Ask a CAM Pro

Q: What’s the best way to program parts with in-process fixturing features?

Tim Trzil

Applications Engineer

Parts that hold themselves? Now we’re talking. Features like tabs, dovetails, or locating bosses can seriously improve setup speed and repeatability, but only if you program them with intention.


Use the feature as part of your setup strategy.

Don’t just treat it like extra geometry. That dovetail or boss can help define your work offset, dial in alignment, or reduce probing time. Build your ops around it, and your setups get faster and more repeatable.


Leave the feature intact as long as possible.

If you’re relying on it to fixture the part, don’t machine it off halfway through. Sequence your ops so the self-fixturing geometry stays put until the very end, right before the part-off or final cleanup.


Create a dedicated op to remove or finish it.

Whether you’re trimming a tab or profiling away a boss, handle that with a separate, clean operation. It keeps your code organized and gives you more control over surface finish, cutter choice, and part handling.


Label and organize those features clearly.

Use layers, colors, or callouts in your CAM file to flag what’s functional and what’s just geometry. If you come back to the file later or hand it off to someone else, those visual cues are lifesavers.


Double-check with simulation.

Just because a feature looks supportive doesn’t mean it won’t flex or shift during a later cut. Simulate with fixturing in place so you know that part is solid from first cut to last.


Talk to the shop floor.

If that tab or boss needs to stay until Op 5, make sure no one grinds it off after Op 2. A quick conversation upfront can prevent a big problem later.


Bottom line?

Self-fixturing features are only smart if your programming treats them that way. Plan around them, protect them, and use them to your advantage.


Have a programming question?


Send it in for the next edition of Ask a CAM Pro!



CAMedy Central

Did someone forward you this newsletter?

Subscribe to get your own copy every week.