12 Great Tools Under $50
at Incremental Tools
|
|
Easy Safety Upgrades, only $42.95
|
Micro Jig's top selling splitters have been improved! The new Steel Pro splitters feature a stainless steel core that not only makes them tougher, but it allows the splitters to be compact enough that two can be installed behind the blade instead of only one. The front splitter keeps the lumber against the fence, and the rear splitter supports the offcut side of the kerf to prevent the most common source of binding when ripping solid lumber. Available for full- or thin-kerf blades. Made in USA.
|
|
|
|
|
These flexible steel rules feature a series of micro-fine guide holes and slots every 1/16", 1/32", & 1/64" that perfectly accept a 0.5mm pencil to give you can't-miss accuracy and consistency for layout work on the edges of project parts. The stop bar adds consistency to your work and even lets you draw lines parallel to an edge. Made In USA.
Apply Coupon Code TR1215 during checkout.
|
|
Normally $45.95
Call or e-mail for Discount Codes
|
These unique clamps will save you time and aggravation in too many ways to list! MatchFit clamps slide anywhere along a groove routed with a common 1/2” – 14° dovetail bit and leave one surface of your work clear of obstructions. Use these clamps to create customizable clamping tables and for attaching table extensions, sub fences, stop blocks, hold downs, and more to your machinery and work tables. Sold in pairs. Jaw depth 2-3/8” (60mm), clamping range 0” – 5-1/4”, compatible with material 1/2” or thicker. |
|
|
|
|
Accurate woodworking depends on getting precise measurements of your materials and your machining results. Find out exactly what's happening in your shop without straining your eyes with these easy-reading digital calipers. The digits are HUGE at 9/16" tall, and the numbers are also widely spaced for reading at a glance. These calipers have a 6" capacity, and the display reads to 0.0005", 1/128", or 0.01mm at the press of a button. Precision ground stainless steel jaws allow precise, repeatable outside, inside, depth, and step measurements.
Apply Coupon Code GCA5 during checkout.
|
|
Available in 6”, 12”, 18”, 150mm, and 300mm, Bend Rules allow you to simultaneously mark two surfaces of a board without moving the rule to improve your consistency, and a scale along the end even allows drawing lines parallel to the edge of the work piece. INCRA's patented marking holes perfectly accept fine 0.5mm mechanical pencils for can’t-miss accuracy & repeatability every 1/16th and 32nd (or 1mm for metric rules). Made in USA.
Apply Coupon Code BND5 during checkout.
|
|
|
|
|
NEW
In stock today, only $34.95
|
The FitFinder 1/2 Gauge automatically finds half the thickness of your workpiece using simple geometry, no math or measuring required! Simplifies setting up resawing jobs, cutting half lap joints and more – just put the board under the gauge, tighten the knob, and use the gauge’s pointer to set the height of your saw blades & router bits or set your saw’s fence position. |
|
In stock, only $44.95/pair
|
Box Clamps keep your project parts perfectly aligned when dry fitting and provide complete access for driving screws or nails during final assembly. Great for all types of 90- degree joints, and the open-sided design allows using them at T-shaped joints like where shelves meet the sides of a case. Sold in pairs, but the biggest savings are in the 4-, 8-, and 12-clamp value packs.
Made in USA.
|
|
|
|
|
This 3" x 6" rule has two stop bars and a grid that allows plotting points relative to the corner of a board in 1/16" intervals. Micro-fine holes and slots in the stainless steel body accept your standard 0.5mm mechanical pencils, and you can even slide off one of the aluminum stop bars to use it as a T-Rule! Made in USA.
Apply Coupon Code XY15 during checkout.
|
|
NEW
Save time & trouble, only $25.95
|
When paired with a MatchFit Dovetail Clamp, Micro Jig’s new stop will eliminate your endless fine tuning when setting up for cross-grain dados, half-lap joints, and inlay work. It automatically sets the locations for the dado’s edges using the actual thickness of the mating board to get a perfect fit every time – no math, no measuring. The Dado Stop also automatically compensates for kerf width, so you can use a standard blade, box joint blade set, or a dado set with equal ease. Requires (1) MatchFit Dovetail Clamp. Made in USA.
|
|
|
|
|
For 30+ years, the Miter Slider has been THE starting point for precision shop-made jigs. These aluminum miter channel runners are adjustable for a perfect fit in standard 3/4” x 3/8” miter slots and operate far more consistently than wooden runners. They can even be securely locked into a channel for mounting stationary fixtures like feather boards. Ultra rigid, light weight, and directly compatible with Build-It Panels for fast jig construction. Made in USA!
Apply Coupon Code MSR15 during checkout.
|
|
Like the original aluminum Miter Sliders, these adjustable miter bar runners allow quickly building accurate sliding jigs that fit standard 3/4" x 3/8" miter slots. The SE's bodies are steel and feature the same low friction GlideLOCK adjusting mechanism used on INCRA miter gauges. Unlike the aluminum Miter Sliders, the SE versions are equipped with removable T-slot retaining clips to provide extra stability for fixtures that need extra travel on table saws equipped with T-slots. Directly compatible with Build-It Panels for fast jig construction. Made in USA!
Apply Coupon Code MSR15 during checkout.
|
|
|
|
|
JessEm's unique two-piece design of these feather boards allows super-fast setups: The feathers remain parallel to the lumber when adjusting the pressure and shortened first feather acts as a setting jig for no-fuss set up. They can be stacked double for wide boards, they attach quickly to fences T-slots with 1/4" hardware, and they even include fittings for installation in the standard 3/4" miter slots.
Apply Coupon Code JFB1 during checkout.
|
|
|
|
Coupons listed in this promotion may not be combined with other existing offers. Offers in this promotion valid only for orders placed between
May 9th and May 15th 2023.
|
|
|
|
|
|
|
