|
Pay close attention to entry and exit moves. Avoid plunging straight in.Use ramps or helical entries to ease the tool into the cut. Brittle parts don’t like surprises, especially at the start or end of a cut.
Sharp tools only. Dull tools will tear instead of shear. In fragile materials, that’s all it takes to ruin a part. Monitor tool wear closely and swap tools sooner than you normally would.
Chatter is your worst enemy. Vibration leads to cracks, plain and simple. Minimize stick-out, use rigid setups, and tune your feeds and speeds to stay out of any resonance zones. If you hear it, fix it fast.
Coolant matters, but be consistent. Some materials (like graphite or composites) hate flood coolant and do better with dry cutting and air blast. Just make sure your cooling method is steady. Thermal shock is a silent killer.
Bottom line?
Machining brittle materials is more about finesse than force. Respect the fragility, and your toolpath will do the job right the first time.
Have a programming question?
Send it in for the next edition of Ask a CAM Pro!
|