March 19, 2026

Time to Read: 7 Minutes


-Hot Take-

If your team still hand-codes everything, you're not old-school, you're just wasting time.

Joke of the Week

Q: What does a vise have in common with a bird?

A: Neither of them should be flying around your shop...

Ask a CAM Pro

Q: What’s the fastest way to verify a new program?

Verifying a new program quickly is all about confidence without carelessness. The goal isn’t just to make sure it runs; it’s to know it runs right before you ever touch metal. A few smart steps can save you from broken tools, scrapped parts, and late nights.


Start in simulation.

Run the program with real tool assemblies, holders, and fixtures loaded. Make sure you’re simulating the posted code, not just the CAM toolpath. Check for over-travel, collisions, and any odd moves between ops. If something looks off here, it’ll be worse on the machine.


Backplot for motion sanity.

Simulation shows collisions, but backplot shows intent. Scrub through the path, zoom into corners and transitions, and watch the tool vector behavior. Look for jumps, plunges, or reversals that seem out of place.


Dry run it above the part.

Set your Z high and run the whole program in single block. This confirms your work offset, tool lengths, and orientation. It’s a quick way to verify the program’s rhythm and sequence without risk.


Use feed and rapid overrides.

Start slow. Run at 10% feed, 25% rapid, and watch the first few tool changes and approach moves. Once you know the program is clean, you can ramp back up to normal speed. Overrides are your best friend during a first run.


Verify key features early.

If the setup allows, probe or measure critical dimensions mid-cycle. This catches offset issues before you burn through the rest of the part. Checking one or two datums up front can save an expensive rerun later.


Keep a checklist.

Before hitting cycle start, verify coolant, spindle direction, work offset, and program number. It takes 30 seconds and can prevent hours of regret.


Take notes for next time.

If you find any tweaks or setup adjustments, document them right away. The next time that part comes up, you’ll verify faster and run smoother.


Bottom line:

Speed comes from preparation, not luck. A few careful checks up front make your first part your best part.


Have a programming question?


Send it in for the next edition of Ask a CAM Pro!

Weekly Poll

Choose from the answers below.

If you left your current role, it would be because:

View the results of last week's poll HERE.

From the Floor

Forgot the Vise, Found the Lesson


"In my early days running CNCs, I once forgot to tighten the vise before a cut. The part kicked loose, and for a second, I thought my shop career was toast.


Instead of booting me, my manager just raised an eyebrow and told me, 'Let’s talk best practices.'


It wasn’t a chewing out, just a reminder that every detail matters. I didn’t make the same mistake twice, and I started running through a mental checklist every time."


-Applications Engineer

CNC Underground: Afterhours

Arthur Field, Operations Manager for the Americas at MTDCNC, joined CNC Underground: Afterhours to share how 25 years in manufacturing, from the shop floor to boardroom, have shaped his philosophy on partnership and navigating industry challenges. This episode is essential listening for anyone seeking actionable insights on building resilient manufacturing teams and leveraging collaboration amid labor shortages, supply chain chaos, and technological disruption.


Key Takeaways:

  • Uncover why real partnerships, not just vendor relationships, are the secret to long-term success and profitability in today’s manufacturing landscape.
  • Hear practical tactics for documenting tribal knowledge, embracing technology, and creating a culture of clarity that adapts to change.
  • Learn how trust, transparency, and vulnerability are critical skills for leaders and teams that want to thrive through industry shifts.

Tech Tip (Powered by GibbsCAM)

In this Tech Tip we explain how to set up a part in the subspindle in GibbsCAM, including solids prep, geometry extraction, coordinate system assignment, and stock alignment for accurate machining and transfer.

CAMedy Central

Industry Intel

GE Aerospace to Invest $1 Billion in US Manufacturing - GE Aerospace’s new $1 billion U.S. manufacturing investment signals rising demand for advanced machining, tooling, inspection, and supplier capacity tied to aerospace and defense production growth.


Manufacturing Workers Happy With Career, Survey Finds - This survey is a useful reminder that manufacturing is a career people genuinely value, especially for growth, problem-solving, stability, and advanced technology, which makes it strong proof for recruiting machinists, programmers, and younger talent into the trade.


Mazak Introduces 0% Financing for US Customers - Mazak’s 0% financing offer is valuable because it lowers the barrier to adding turning and machining capacity, which can help manufacturers upgrade equipment, improve productivity, and preserve cash at the same time, especially if they act before the March 31, 2026 deadline.

Industry Growth (Open Jobs)

A few hot openings across the industry this week:


CNC Swiss Machinist - Northland Screw Products - St. Francis, MN


CNC Swiss Machinist - EPTAM Precision - Lakeville, MN


CNC Machinist - Sadler Machine Company, Inc. - Cedar Rapids, IA


CNC Machinist - RPM Solutions, Inc - Rapid City, SD


Machinist - Malloy Electric - Mandan, ND


CNC Machinist/Tool Room Tech - Cardinal Health - Norfolk, NE


Lead Swiss Machinist Programmer - Modern Machining - Kansas City, MO



CNC Mill Machinist - KMG Tool & Machine - Wichita, KS

Trade Show & Event Radar

Date

Show

Location

April 8-9

2MTEC

Albert Lea, MN

April 13-16

Machining Summit on the Summit

Mammoth Lakes, CA

April 13-16

Modex26

Atlanta, GA

April 22-23, 2026

MD&M South

Charlotte, NC

May 5-6

Morris & Tsugami America Open House

Brooklyn Park MN

June 22-25

Automate

Chicago, IL

July 29-30

Advanced Manufacturing Expo

Grand Rapids, MI

Sept 14-19, 2026

IMTS

Chicago, IL

Did someone forward you this newsletter?

Subscribe to get your own copy every week.