Issue 48

May 21, 2026

Time to Read: 5 minutes


-Hot Take-

Waiting for the "right moment" to modernize your shop always turns into watching your competitors lap you.

Joke of the Week

Q: What's the difference between a quote and a guess?

A: A quote has a company logo on it.

Ask a CAM Pro

Real shop problems. Answers from people who have been there.

How do you handle multiple turret programming efficiently?


Multi-turret machines can be a huge advantage, or a fast way to make expensive scrap. The efficiency comes from synchronization you can trust, not from trying to overlap everything. The goal is stable cutting, clean handoffs, and predictable timing, with both turrets working without fighting each other.


Start with a clear division of labor.

Decide which turret owns which features. Keep roughing and heavy cuts on the most rigid turret and reserve the other for supporting ops like drilling, chamfering, or finishing. If both turrets touch the same critical surface, you increase the chance of mismatch and rework.


Program one turret first, then layer the second.

Build a complete, safe baseline program for Turret 1, then add Turret 2 around it. This keeps the process controllable and makes it easier to troubleshoot sync points. Trying to program both simultaneously from the start usually turns into a timing puzzle.


Use synchronization points like hard checkpoints.

Treat sync codes as “no debate” moments. Both turrets should arrive at known safe positions before any transfer, shared-zone move, or operation overlap. Add small dwell time where needed to prevent race conditions, especially around clamps, chucking, part transfers, and spindle stops.


Protect shared work zones.

Define keep-out zones around chucks, steady rests, sub spindles, and tool change areas. Even if collision checking is available, you still want a simple rule set: only one turret enters the danger zone at a time unless the move is proven and repeatable.


Balance cycle time with spindle load, not just overlap.

The best overlap is when both turrets cut with stable loads. If you stack two heavy cuts at once, you may hit spindle load limits, induce chatter, or create thermal growth that hurts size control. Overlap light ops with heavy ops, not heavy with heavy.


Standardize tool data across turrets.

Use consistent tool naming, offsets, and assemblies so it is obvious what is in each station. Mismatched tool lengths or duplicate tool numbers across turrets create avoidable prove-out headaches.


Verify timing with a simple timeline.

Before you post, map your operations like a relay: what each turret is doing and when. Look for dead time, but also look for risky overlap near clamp events and shared zones. If you cannot explain the timing clearly, it is not ready to run.


Prove out in stages.

First run each turret’s toolpath above the part, then introduce overlap gradually. Use single block and overrides during initial sync testing. Most multi-turret issues show up as timing and clearance problems, not cutting problems.


Bottom line:

Efficient multi-turret programming is controlled coordination. Split responsibilities, build one safe stream first, sync at clear checkpoints, and overlap only where it reduces time without increasing risk.


Have a programming question?


Send it in for the next edition of Ask a CAM Pro!

Weekly Poll

Choose from the answers below.

(Keep scrolling to see last week's poll results.)

What causes the most shop floor resentment?

View the results of last week's poll HERE.

From the Floor


That Time Automation Ran Scrap All Night


“The first time we set up our new palletized system for lights-out machining, I thought we had cracked the code.


I came in on Monday expecting full bins and easy money. Instead, we had missed one small error in the first batch. The machine did exactly what it was told to do. It kept running, nobody was there to catch it, and by morning we had thousands of dollars in material turned into scrap.


That was the lesson I never forgot: automation will run scrap just as fast as it runs good parts. After that, I never skipped the final setup check again.”


– Machine Shop Owner

Video of the Week (Powered by GibbsCAM)

In this Intermediate Tooling video, we break down how GibbsCAM determines where tooling assemblies can mount, how stations and toolgroups work together, and why orientation behavior changes depending on the machine definition.

CAMedy Central

Industry Intel

Process Automation and Instrumentation Market to Reach USD 2.0 Billion by 2035 as Smart Manufacturing Accelerates Global Industrial Transformation

Future Market Insights projects the process automation and instrumentation market will grow from about USD 1.0 billion in 2025 to USD 2.0 billion by 2035, driven by smart manufacturing, digitalization, AI/IoT adoption, and demand for more efficient industrial operations.


Vice President JD Vance Speaks at Kansas City Manufacturing Plant

Vice President JD Vance spoke at Milbank Manufacturing in Kansas City on May 18, promoting the Trump administration’s manufacturing policy and discussing efforts to support American manufacturing.


U.S. Indicts Four Chinese Container Manufacturers Alleging Pandemic-Era Price-Fixing Cartel

The Justice Department indicted four major Chinese shipping-container manufacturers and seven executives, alleging they conspired to restrict output and fix prices during the COVID-era supply chain crisis, affecting billions in global commerce.

Manufacturing Survey

Manufacturing policy is being shaped now. Shops should have a say.

Tariffs. Supplier risk. Federal policy shifts. The 2026 Reshoring Survey captures how manufacturers are actually responding and what's driving their decisions.


In 10 minutes, you'll be able to see exactly how your strategy compares to peers, and your input shapes data used by policymakers and economic developers across the country.


Take the survey → Get the full results.

Industry Growth (Open Jobs)

A few hot openings across the industry this week:



CNC Machining Center Manager - Lapham-Hickey Steel - St. Paul, MN


Senior CNC Swiss Programmer - Tsugami America -Brooklyn Center, MN


Manufacturing Engineer I - Winnebago Industries Inc. - Forest City, IA


CNC Machinist - RPM Solutions Inc - Rapid City, SD


Precision Machining Instructor - ND State College of Science - Wahpeton, ND


CNC Machinist - Dimatic - Omaha, NE


CNC Machine Setup/Operator - G&G Manufacturing - Omaha, NE


CNC Mill Setup Machinist - R&S Machining - St. Louis, MO


CNC Programmer - Excel Tool & Mfg. - Lenexa, KS

Trade Show & Event Radar

Date

Show

Location

June 22-25

Automate

Chicago, IL

July 21

42nd Annual MPMA Open Golf Classic

Coon Rapids, MN

July 29-30

Advanced Manufacturing Expo

Grand Rapids, MI

Sept 5

Minnesota Manufactured Day - Minnesota State Fair

Falcon Heights, MN

Sept 14-19

IMTS

Chicago, IL

Oct 6-7

Top Shops Conference

Cleveland, OH

Oct 21-23

FABTECH

Las Vegas, NV

Oct 28-29

MD&M Midwest

Minneapolis, MN

Nov 11-13

Titans of CNC Boombastic Show

Flower Mound, TX

Did someone forward you this newsletter?

Subscribe to get your own copy every week.