Issue 56

July 16, 2026

Time to Read: 6 Minutes


-Hot Take-

Every machinist learns humility the hard way; one missed decimal is worth 20 years of wisdom.

Joke of the Week

I told my kid a machining joke. He said, "That's boring!" I said, "Exactly!"

Ask a CAM Pro

Real shop problems. Answers from people who have been there.

How do I manage large tool libraries efficiently?


As your shop grows, tool libraries can quickly become one of the hardest things to keep organized. Duplicates, missing holders, wrong diameters, and outdated feeds all slow you down. A well-managed tool library keeps everyone programming from the same playbook and reduces setup time across the board.


Start with a single source of truth.

Define a master tool library that represents your “approved” tools; ones that are physically in the shop and proven to work. Include tool numbers, descriptions, holders, stickout lengths, and any proven cutting data or technology settings your shop has validated. Once your baseline is established, everyone is programming from the same proven data.


Create smaller libraries by function or machine.

Create filtered libraries or favorites for each machine group, department, or material type while maintaining one master library. For example, a “5-axis titanium” library might have a tighter set of tools than a “3-axis aluminum” one. This keeps programming fast and prevents people from scrolling through hundreds of irrelevant tools.


Use consistent naming and numbering.

Develop a naming format that instantly tells you what a tool is. For example: “EM-375-CARB-3FL-LOC1.0” or “DRL-250-135SPT-COOL.” Avoid random naming like “Tool 12” or “3/8 Endmill.” Use the same numbering system in both the CAM library and the tool crib so your setup sheets and machines always agree.


Include complete assemblies.

Don’t stop at the cutter. Accurate assemblies are especially important for collision checking and machine simulation. This prevents collisions, improves toolpath accuracy, and saves you from trial-and-error stickout adjustments on the floor.


Assign tool templates with material-based parameters.

If your CAM system supports tool templates or machining databases, configure them to apply proven feeds, speeds, and stepovers based on the selected material. This eliminates guesswork and ensures that every programmer starts with cutting parameters that are already proven.


Keep your library clean.

Schedule periodic reviews to remove duplicates, expired tools, or old vendor data. Limiting who can modify the master library helps keep it accurate and consistent over time. A maintained library is better than a massive one full of clutter.


Integrate with your tool management system (if you have one).

If your shop uses a tool management database or presetting system, consider integrating it with your CAM software so tool data stays consistent between programming and setup. That way, the tool number, length offset, and gauge line all stay consistent between programming and setup.


Back up and version your libraries.

Tool libraries are as valuable as your CAM files. Keep them in a shared, version-controlled location so updates don’t get lost or overwritten. If something goes wrong, you can always roll back to the last known good version.


Bottom line:

A well-managed tool library reduces programming time, prevents setup mistakes, and keeps everyone in the shop working from the same playbook. Invest a little time maintaining it, and you'll save countless hours on the shop floor.


Have a programming question?


Send it in for the next edition of Ask a CAM Pro!

Shop Floor Debate

Where does most CNC knowledge in your shop actually come from?

Last week's debate: The winning answer put some of the responsibility back on the industry.

From the Floor

We Lost the Job Traveler and Our Minds


"There was a day when a job traveler just disappeared. Completely gone. We tore the shop apart.


Four of us spent a whole day flipping through stacks of papers, checking under machines, asking everyone if they'd seen it. Couldn’t run the job, couldn’t ship, couldn't even give an update to the customer. We ended up starting over, reinspected everything, chased down what info we could salvage.


A couple months later, someone found it sitting on a random shelf in the bathroom. We laughed, but I could’ve thrown that whole stack in the dumpster after what it put us through."


– Machinist

Video of the Week (Powered by GibbsCAM)

There's a Faster Way to Rough Parts | GibbsCAM Strategies

Learn how to use high-speed machining strategies, modern tooling, and smarter toolpaths in GibbsCAM to cut cycle times, improve tool life, and reduce wear on your machines.

CAMedy Central

Industry Intel

Manufacturing Benchmarking Survey Highlights Cost Pressures and 2026 Growth Outlook

A 2026 Manufacturing Benchmarking Survey, based on 456 U.S. manufacturing facilities, finds companies managing persistent tariff- and material-driven cost pressures while still holding a cautiously positive outlook, with over half expecting a positive 2026 and roughly 60% projecting revenue growth of at least 5%.


How a $160 Million Grant Could Reshape Advanced Manufacturing in Akron and Beyond

Northeast Ohio was named a National Science Foundation "Regional Innovation Engine," bringing up to $160 million in federal funding over a decade, plus roughly $120 million in local matching support, to advance polymer, metals, and chemicals/coatings manufacturing, with hopes of creating or retaining 20,000 jobs and training 12,000 workers in the region.


Sandvik Coromant Aren't Just a Tooling Company, and IMTS 2026 Is Where They're Proving It.

Arthur Field of MTDCNC sits down with Victoria and Jeremy of Sandvik Coromant to go behind the scenes of one of manufacturing’s biggest trade show presences, from twenty-four months of planning and live customer component displays to one-on-one meetings with engineering experts and brand-new digital experiences inside the booth.

Industry Growth (Open Jobs)

A few hot openings across the industry this week:



CNC Programmer - Marvin - Warroad, MN


CNC Lathe Machinist - Brenk Brothers Inc - Minneapolis, MN


CNC Programmer - Viking Pump, Inc. - Cedar Falls, MN


Weekend CNC Machine Operator - Applied Engineering - Yankton, SD


CNC Machinist (Night Shift) - Aaseby Industrial Machining LLC - Wahpeton, ND


CNC Machinist/Technical Customer Support - Productivity Inc - La Vista, NE



CNC Programmer - Merrill Steel - Springfield, MO


CNC Programmer - Modig Machine Tool US - Wichita, KS

Manufacturing Survey

Manufacturing policy is being shaped now. Shops should have a say.

Tariffs. Supplier risk. Federal policy shifts. The 2026 Reshoring Survey captures how manufacturers are actually responding and what's driving their decisions.


In 10 minutes, you'll be able to see exactly how your strategy compares to peers, and your input shapes data used by policymakers and economic developers across the country.


Take the survey → Get the full results.


Trade Show & Event Radar

Date

Show

Location

July 21

42nd Annual MPMA Open Golf Classic

Coon Rapids, MN

July 29-30

Advanced Manufacturing Expo

Grand Rapids, MI

Sept 5

Minnesota Manufactured Day - Minnesota State Fair

Falcon Heights, MN

Sept 14-19

IMTS

Chicago, IL

Oct 6-7

Top Shops Conference

Cleveland, OH

Oct 21-23

FABTECH

Las Vegas, NV

Oct 28-29

MD&M Midwest

Minneapolis, MN

Nov 11-13

Titans of CNC Boombastic Show

Flower Mound, TX

Did someone forward you this newsletter?

Subscribe to get your own copy every week.