Workforce Partnerships Built on Performance
|
|
The 10X Workforce Brief
Practical workforce decisions for skilled trades leaders
Issue 25 · November 2026
|
| |
|
Budget season · Workforce planning
2027 Workforce Planning: Hire Now or Wait?
If you’re setting 2027 headcount right now, you’re making one of the hardest calls in the business: how many skilled people to commit to before the work is certain.
Commit too early, and payroll arrives before the revenue. Commit too late, and the work arrives before the people.
So the real job isn’t choosing “now” or “later.” It’s securing the people you can’t operate without, while keeping the rest of the plan flexible enough to follow the work.
|
|
The work is softening
8.1
months of contractor backlog in October, down 0.6 months from September.
ABC Construction Backlog Indicator
|
|
|
The people aren’t
3.6%
construction unemployment in October, tying the lowest October rate on record.
AGC analysis of BLS data
|
|
|
|
In AGC and NCCER’s 2026 survey, 37% of firms had cut headcount over the past year. Yet nearly three-quarters expect to add employees in the next 12 months. Many firms will be recruiting from the same small pool of experienced tradespeople.
National construction figures. Conditions in other industries and local markets vary.
|
What getting it wrong looks like
Both quietly erode margin.
|
Too early
Overhead arrives before the revenue.
Wages, benefits and hiring costs start on day one. Idle capacity then pushes you to chase lower-margin work just to keep crews busy.
For example: an electrical contractor adds two journeymen in January for a package still in negotiation. The award slips to May, and four months of payroll go to work that didn’t need them.
|
|
|
Too late
The work arrives before the people.
In construction, worker shortages were the most-cited cause of project delays (42% of firms). Overtime fills the gap and wears down your best people.
For example: a manufacturer waits for a new production line to be approved before looking for a maintenance technician, then covers the gap with overtime and outside service calls while the search runs.
|
|
|
|
Try this before your next budget meeting
Next to each planned hire, note three things: how likely the work is and when it starts, how long the seat would take to fill, and what a month of hiring early costs compared with the margin at risk if the seat is empty. No single number decides it, but together they show the trade-off. Likely work and a slow-to-fill role make a stronger case for starting early. Uncertain work and an easy-to-fill role suggest waiting.
|
|
|
|
A practical framework
Three steps before you set 2027 headcount
Work through these with your operations and finance leads. You set the thresholds, because they depend on your cash position and business model.
|
1
|
Rank roles by impact and lead time
Does work stop without this role, and how long would it take to fill?
Critical roles usually carry a license, lead a crew, hold customer relationships, or keep complex systems running: a foreman, a maintenance lead, a controls specialist.
To find the lead time, count backward from when you need the person: sourcing, interviews, an offer, notice at their current job (often two weeks), and onboarding. If a role is critical and slow to fill, start recruiting early. Starting the search isn’t the same as making the commitment.
|
|
2
|
Grade your workforce demand by certainty
How certain is the demand, and which roles will it affect?
Demand may come from project backlog, production schedules, maintenance needs, service contracts, order volume, occupancy or seasonal workload. Whatever drives yours, separate what’s signed or committed from what’s probable (verbal awards, renewing agreements, forecast volume) and what’s pipeline (open bids or hoped-for growth). Then check each role separately.
|
|
3
|
Set triggers, then choose the structure
Decide now what event releases each hire.
A trigger might be a specific award, or committed work for that team passing a level you choose. Agree on it now, so when it happens you act without another budget debate. Then match the commitment to the certainty, adjusted for how much working capital you can tie up.
|
|
|
A starting point, not a rulebook
Match the commitment to what you know
|
|
Critical role · signed work and ongoing demand
A permanent hire is usually justified.
|
|
Critical role · work is probable or short-term
Start the search. Evaluate on the job, or add flexible capacity, before committing.
|
|
Supporting role · work is signed
Add flexible capacity. Revisit permanent hiring if demand holds.
|
|
Supporting role · work is pipeline
Hold until your trigger fires.
|
Strong reserves let you hire further ahead. Tight working capital calls for greater flexibility.
|
|
|
Commit headcount to the work you’re sure of. Stay flexible for the work you’re hoping for.
|
|
|
How we approach it
Start with the decision, not the open position
Most hiring conversations start with a job description. Ours start with the questions above, then match the structure to the answer:
| 10X Plus™ Flexible skilled capacity, such as extra electricians for a project peak, without adding permanent headcount. |
| 10X Growth™ Evaluate a professional, such as an HVAC technician, on the job before making a permanent commitment. After 1,080 hours, they can move to your payroll at no additional conversion cost. |
| 10X Connect™ Direct hire when a permanent role is justified and you’d rather spread the placement fee over hours worked than pay it upfront. |
Sometimes the right answer is to wait, cross-train someone, or fill the role through your own network. We’ll say so when it is.
|
|
When a permanent hire is justified
Making the hire without a large upfront fee
Once signed work and ongoing demand justify a permanent hire, the remaining question is how to pay for the placement. With 10X Connect™, the placement fee is spread evenly across the new hire’s first 1,080 working hours and invoiced weekly as those hours are worked. It changes when you pay, not whether the hire is the right call. If you’re not yet sure the role is permanent, evaluating through 10X Growth™ or adding capacity through 10X Plus™ may fit better.
|
|
Lump-sum placement fee
|
|
$18,750
paid upfront, as is common in traditional direct hire
|
|
|
|
$0 upfront
about $17.36 per hour worked, invoiced weekly over the first 1,080 hours
|
|
Example: $75,000 salary at a 25% placement fee. Under our current agreement, Connect fees are 20–25% of annual salary, depending on skill level and position. This shows payment timing, not savings: the placement fee is the same in both columns, and wages, benefits and payroll costs don’t change.
That’s Workforce Liquidity™ in action: protecting your working capital by tying the recruitment fee to hours actually worked, instead of one large payment upfront.
|
| ✓ |
Predictable cash flow. A known weekly fee tied to hours worked, ending at 1,080 hours (roughly six months full-time). |
|
| ✓ |
If the hire leaves before 1,080 hours, billing pauses once you notify us. At your request, we’ll work to find a replacement at no additional placement fee, and billing resumes only for the remaining hours once the replacement starts. |
|
| ● |
What doesn’t change: the professional is your employee from day one. You carry wages, benefits, payroll taxes and all normal employer obligations. Connect reduces the upfront fee. It doesn’t remove the commitment of a permanent hire, or the risk of hiring before the work materializes. |
|
|
|
30 minutes · Complimentary · No obligation
Want a second set of eyes on your 2027 plan?
In a 30-minute conversation, we’ll look at your 2027 workforce plan together: where a permanent hire makes sense, where flexible capacity may be a better fit, and how workforce demand, timing, and cash flow should guide your decisions. That includes approaches that don’t involve us.
Prefer email? Just reply with the roles on your 2027 list.
|
|
|
The better we know you, the better we serve you.
— The 10X Workforce Team
Building the 2027 budget with your operations lead or CFO? Forward this before your next planning meeting.
|
|
|
Sources
Associated Builders and Contractors, Construction Backlog Indicator (October 2026 survey, released Nov. 10, 2026). Associated General Contractors of America, analysis of BLS employment data (Nov. 6, 2026); the October unemployment rate is not seasonally adjusted. AGC of America and NCCER, 2026 Workforce Survey (Sept. 3, 2026). All figures are national and specific to construction. The scenarios are illustrations, not client results. 10X Connect™ terms are governed by the 10X Workforce Service Agreement and the applicable Direct Hire Agreement.
|
|
10X Workforce · Your Strategic Labor Partner
Electrical & Mechanical Contractors • Construction • Manufacturing • Warehousing • Data Centers • Facilities • Property Management
10xworkforce.com
· 888-208-5727
|
|
Proud Member Of
Workforce Partnerships Built on Performance. Powered by Workforce Liquidity™.
© 2026 10X Workforce. Workforce Liquidity™, 10X Plus™, 10X Growth™ and 10X Connect™ are trademarks of 10X Workforce.
|
|