Issue 71

October 29, 2026

Time to Read: 6 minutes


-Hot Take-

Too many shops have million-dollar machines and a ten-cent approach to knowledge capture.

Joke of the Week

Q: Why wouldn't the skeleton run the first part?

A: He didn't have the guts to press Cycle Start.

Ask a CAM Pro

Real shop problems. Answers from people who have been there.

How do I approach programming thin, flexible parts?


Thin-walled and flexible part machining strategies do not fail because of bad toolpaths; they fail because cutting forces overwhelm the part's ability to hold its shape. Programming around that reality is the whole game.


Minimize and balance cutting forces.

Use light radial engagement, sharp tools, and climb milling to keep forces low and consistent. On symmetric thin walls, alternate cutting sides so the part isn't pushed the same direction repeatedly.


Rough in stages, finish last.

Remove bulk material while the part still is supported by surrounding stock, and save your finish passes on the most flexible features for as late as possible in the sequence, when the part has the least material left to deflect.


Support the part physically.

Sacrificial webs, wax support, low-melt alloys, or vacuum fixturing can hold a thin feature rigid during machining and get removed afterward. For some feature geometries, this is the difference between a good part and scrap.


Slow down feed where deflection risk is highest.

Reducing feed rate on the most flexible passes, even if it costs some cycle time, is often cheaper than reworking a part that walked out of tolerance.


Choose tool geometry that favors low force.

Sharp, positive-rake tools with light cutting edges reduce the pressure pushing on the wall. Avoid dull or heavily worn tools on delicate features; they multiply the force problem.


Consider machining order across the whole part.

Sometimes the fix isn't in a single operation but in the sequence. Leave connecting webs or tabs until the very end, and remove them last with a light finishing pass.


Bottom line:

Thin, flexible parts reward patience: balance your forces, support what you can, and save the most delicate cuts for last. A slower, well-sequenced program beats a fast one that warps the part.



Have a programming question?


Submit your questions here anonymously!

Shop Floor Debate

Where are shops losing money without tracking it closely enough?

Last week's debate: Nearly half of our readers pointed to the same problem as the one shops ignore the longest. Do you agree?

From the IMTS Floor

AI vs. the Machinist: Is That Even the Right Question?


AI is making its way into CNC programming, and depending on who you ask, it's either an exciting advancement or a reason for concern. But is the real question whether AI will replace machinists, or whether it can eliminate the repetitive work that keeps skilled people from doing more valuable things?


At IMTS 2026, Jessica met with Theo Saville, CEO of CloudNC, to discuss the future of CAM programming, the challenges of automating precision manufacturing, and what AI could mean for the people doing the work.


It's a conversation worth having, especially as these tools move from big promises to practical applications on the shop floor.


What do you think? If AI could take repetitive programming tasks off your plate, would you welcome it, or would you worry about what comes next?

CNC Underground: Afterhours Podcast

Mike Baudrexl, founder of BEC Machining and Legetti Performance, joins CNC Underground: Afterhours to reveal why usability, not just precision, should be the next big focus for every CNC shop. Drawing from nearly four decades in the industry, Mike shares how his Kinetic OS innovation is reshaping operator experience, boosting productivity, and tackling the skills gap head-on. This episode is a must-hear for anyone overwhelmed by clunky controls or looking to make their shop more efficient and less dependent on tribal operator know-how.


Key Takeaways:

  • Learn why poor usability in CNC controls is silently draining shop profits and increasing training costs.
  • Understand how automation and intuitive workflows can allow less experienced operators to match the speed and safety of seasoned machinists.
  • Discover actionable strategies to reduce operator errors, streamline setup, and attract the next generation of talent to the trade.


Video of the Week (Powered by GibbsCAM)

Copilot Enhancements | GibbsCAM 2027 Highlight

See what’s new in GibbsCAM Copilot, from clearer answers and source links to image support and video references that help you find the information you need faster.

CAMedy Central

Industry Intel

Salient Motion CEO Plans ‘Many More’ Factories for Defense Components

Former Anduril engineer Vishaal Mali explains how his startup, Salient Motion, is reshoring production of precision ball and roller screws, critical missile components largely lost to China and Europe, at a new operation in Saginaw, Michigan, using AI to capture machinists’ know-how and train new workers as it plans further factories.


New Orbital Thread Mill Reduces Risk and Complexity in Internal Threading

Sandvik Coromant has launched CoroThread Mill 500, a solid carbide orbital thread mill that succeeds its CoroMill Plura R217 and is built for reliable internal threading of blind and through holes in deep threads, long overhangs, difficult materials and unstable setups.


Robot-Mounted 3D Inspection Combines DepthScan Imaging with PolyWorks Measurement

Ajile pairs its robot-mounted DepthScan 3D Imager with PolyWorks software to capture complex part features from multiple angles and automatically check them against CAD models and drawings, with the option to move validated setups into faster fixed multi-imager cells for production.

Industry Growth (Open Jobs)

A few hot openings across the industry this week:


Toolroom Machinist/CNC Programmer - Continental Hydraulics, Inc. - Shakopee, MN


Multi Axis CNC Programmer - MRG Tool and Die - Faribault, MN


CNC Machinist - Mill Creek Machining - Paullina, IA


Senior Machinist - Malloy Electric - Dakota Dunes, SD


Manual Machinist - Industrial Equipment Sales & Service, Inc. - Williston, ND


Machinist - TAB Performance - Lincoln, NE


Multi Axis CNC Machinist (2nd Shift) - Seyer Industries Inc. - Saint Peters, MO


CNC Machinist - Spirit AeroSystems - Wichita, KS

Trade Show & Event Radar

Date

Event

Location

Nov 11-13

Titans of CNC Boombastic Show

Flower Mound, TX

Feb 9-11

MD&M West

Anaheim, CA

Feb 22-24

Midwest Manufacturers Trade Show & Conference

Branson, MO

April 19-22

Machining Summit

Mammoth Lakes, CA

May 4-6

Precision Machining Technology Show (PMTS)

Cleveland, OH

May 10-13

Automate

Las Vegas, NV

Did someone forward you this newsletter?

Subscribe to get your own copy every week.