December 4, 2025

Time to Read: 6 Minutes


CAM Joke of the Week

How is tool wear like aging?

Everything looks fine until one day you wake up with chamfers you definitely did not approve.

Industry Intel

AI and Smart Manufacturing Technologies Aim to Reduce Injuries on Production Floors - AI and smart manufacturing technologies like predictive maintenance, wearables, and advanced sensors are helping production floors catch hazards earlier and prevent common injuries such as strains, slips, and machine-related accidents. As digitization increases across manufacturing, facilities using these tools are already seeing fewer incidents, giving safety teams more visibility and time to intervene before something goes wrong.



The State of Ransomware in Manufacturing and Production in 2025 - Ransomware attacks on manufacturing continue to be fueled by exploited vulnerabilities and skills gaps, but stronger defenses are reducing data encryption even as extortion-only attacks rise. While ransom demands, payments, and recovery costs have dropped, more than half of affected manufacturers still pay ransoms, and IT/cyber teams report high stress and workload as ransomware tactics become more complex.


Four Ways to Supercharge Tool Life and Shop Throughput - four practical ways machine shops can extend tool life and boost throughput, from analyzing wear patterns and strengthening operator habits to filling internal capability gaps and implementing automation like hands-free tool changers. 


Industry Growth (Open Jobs)

A few hot openings across the industry this week:



CNC Programmer/Manufacturing Technician - Continental Hydraulics - Shakopee, MN


CNC 5 Axis Mill Engineer and Programmer - Twin City EDM and Mfg. - Fridley, MN


CNC Machinist - Ledford Engineering - Cedar Rapids, IA


Engineering Technician - Dakotaland Manufacturing - Watertown, SD


Tool & Die Maker - Marvin - Fargo, ND



CNC Machinist/Programmer - MetalQuest Unlimited, Inc. - Hebron, NE


CNC Programmer/Set Up - Stahl Specialty Company - Kingsville, MO


CNC Machinist - Spirit AeroSystems - Wichita, KS

CAM Feature of the Week (Powered by GibbsCAM)

GibbsCAM Viewer | See Everything, Change Nothing

GibbsCAM Viewer gives everyone on the team the power to view, inspect, and understand CAM data without changing a thing. Built on the same interface as GibbsCAM Industrial, it’s instantly familiar for operators, managers, and quality teams. Open part files, explore toolpaths and simulations, take measurements, and generate reports—all while keeping your NC programs fully protected. It’s the easiest way to improve communication, reduce errors, and keep the entire shop on the same page.

Trade Show & Event Radar

Date

Show

Location

Dec 9-10

2025 Okuma Machine & Automation Fair

Charlotte, NC

Feb 3-5, 2026

MD&M West

Anaheim, CA

Feb 23-25

Midwest Manufacturers Trade Show & Conference

Branson, MO

April 13-16

Modex26

Atlanta, GA

April 22-23, 2026

MD&M South

Charlotte, NC

Sept 14-19, 2026

IMTS

Chicago, IL

CNC Underground: Afterhours Podcast

Chris Karnitz, Continuous Improvement Engineer, joined CNC Underground: Afterhours to share his journey from forklift driver to leader in manufacturing, all achieved through hands-on grit and a passion for shop culture. This episode dives into the importance of tribal knowledge, team-driven problem-solving, and why variety on the shop floor keeps people growing and engaged.


Key Takeaways:

  • Discover how documenting and sharing tribal knowledge is essential to sustaining shop efficiency and innovation.
  • Learn why investing time in perfect fixtures and open communication leads to fewer headaches and smoother operations.
  • Hear real strategies for balancing efficiency projects while keeping teams motivated and adaptable in a fast-changing industry.


Ask a CAM Pro

Q: How do I simplify 5-axis simultaneous toolpaths?

5-axis programming doesn’t have to be a circus act. The power is incredible, but too much motion can turn a clean setup into a confusing mess of tilts, flips, and gouges. The trick is knowing when to use all five axes and when to lock a few down.


Start with positioning, not motion.

Ask yourself what really needs simultaneous control. A lot of 5-axis work can be done as 3+2, locking the part at an angle, machining with 3-axis motion, then repositioning. It’s faster to program, safer to run, and easier to prove out.


Use tool axis limits.

Don’t give the software full freedom to swing the tool. Set lead and lean angle constraints so the cutter tilts just enough to maintain contact or clear the holder. Unconstrained motion is what causes sudden flips and unpredictable moves.


Drive the path from simple geometry.

Clean, continuous drive surfaces make smooth motion. Avoid splitting paths into tiny patches or using complex edges as tool vectors. The cleaner the geometry, the calmer the tool motion will be.


Control tilt transitions.

Rapid changes in tool orientation can cause spikes in acceleration and gouges at surface intersections. Use smoothing filters or transition zones so the machine eases between tilts instead of jerking from one vector to another.


Simplify reorientations.

If you need to change sides, do it in a controlled retract, pull up, rotate, and re-approach. Letting the toolpath swing around the part in one continuous move might look cool in simulation, but it’s a nightmare to debug when something clips.


Use machine limits early.

Simulate with the actual machine kinematics loaded before you post. Every 5-axis machine has different travel limits and singularities. You can avoid most crashes by staying inside known safe zones before the code ever hits the control.


Pick your battles.

Reserve full simultaneous motion for geometry that truly needs it—like impellers, ports, and sculpted surfaces. Everything else is usually cleaner and faster in indexed positioning.


Bottom line:

5-axis control isn’t about showing off; it’s about cutting smarter. Simplify the motion, respect machine limits, and let the extra axes work for you, not against you.


Have a programming question?


Send it in for the next edition of Ask a CAM Pro!



CAMedy Central

Did someone forward you this newsletter?

Subscribe to get your own copy every week.