September 2026

 

The Radiant Choice:

Designing Your Ideal Hydronic or Electric System

Radiant technology delivers unmatched climate control and environmental management exactly where you need it most.


Creatherm, Uponor, SunTouch and tekmar deliver premium indoor comfort and effortless outdoor snow melting. To assist with your design specifications, we're breaking down the primary system configurations spanning electric and hydronic technologies for both interior thermal comfort and exterior snowmelt applications.

The Electric Advantage:

Low-Profile Integration & Rapid Thermal Response

Engineered for zero-clearance indoor applications and independent outdoor runs, electric systems bypass the need for primary fluid loops, offering fast mechanical installation directly in thin-set or pavement.


Indoor Application: SunTouch(R)

TapeMat | UnderFloor Mat | WarmWire Cable | SlabHeat

SunTouch(R) delivers a versatile range of electric floor warming solutions engineered for fast job-site execution and minimal floor-height impact. Whether handling irregular room shapes, retrofits, or slab pours, this matrix of products integrates cleanly into any indoor specification:


  • TapeMat: Pre-spaced open-mesh mat for rapid thin-set installs.
  • UnderFloor Mat: Installs between floor joists from below the subfloor.
  • WarmWire: Flexible loose wire to easily navigate tight or irregular spaces.
  • SlabHeat: Heavy-duty rugged cable tied directly to rebar inside concrete pours.


More on SunTouch Indoor Solutions --> here


Outdoor Application / Snow-Melt: SunTouch(R)

ProMelt Mat and ProMelt Cable

Choosing electric snowmelt products over a hydronic system provides a simpler, lower-maintenance solution ideal for residential driveways and walkways.

Heavy-duty, rugged SunTouch ProMelt Mats or Cables are buried directly under concrete, asphalt, or pavers. Bypassing insulation panels and plumbing manifolds entirely, these rugged cables connect directly to an electrical contactor panel to clear snow using pure electrical resistance.


ProMelt Mat


  • Fastest installation option for rectangular shaped areas
  • Unroll and secure to rewire or rebar using cable ties
  • 38 or 50 Watt/ft2 mats


ProMelt Cable


  • Flexible choice for curves, stairs and free-form shapes
  • Space at 3" or 4" depending on heat loss calculations
  • Attach to existing slab with CableStrapTM


More on SunTouch SnowMelt solutions --> here

ProMelt(R) Electric Snow Melting Mats & Cables --> Sales Brochure

The Hydronic Advantage:

High-Thermal Mass & Structural Infrastructure

While electric configurations excel in localized zones, extensive layouts require the heavy-duty scaling and lower operational costs of a hydronic network. Utilizing fluid thermal mass allows design professionals to efficiently heat broad surface areas while retaining complete freedom over the primary fuel source.

Indoor Thermal Comfort:

Creatherm S20 &

tekmar 564

Uponor

Wirsbo hePEX tubing

Exterior Snowmelt:

Creatherm S45 &

tekmar 654

Whether pouring an interior slab or a commercial driveway, the installation relies on Creatherm interlocking panels with Uponor Wirsbo hePEX tubing rapidly snapped into place to completely eliminate tedious tie-down labor. This unified footprint effortlessly transitions from indoor comfort to outdoor ice management by simply scaling the panel thickness and pairing it with either a tekmar 564 thermostat or a tekmar 654 controller.

Technical Checklist: 5 Products, 2 Environments

The Shared Foundation (Indoor & Outdoor):

Uponor Wirsbo hePEXTM Tubing:

  • Flexible, oxygen-barrier distribution lines engineered to protect mechanical components from internal corrosion across applications.


Indoor Thermal Comfort Setup:

Creatherm S20 Panels:

  • Lower-profile, 2-inch panel providing an R-6 rating with a specialized grid that accommodates 1/2" and 5/8" PEX at standard 6" centers and 45-degree angles, making it ideal for interior slab over-pours and residential retrofits.

tekmar 564 Invita Thermostat:

  • a 24V AC, low-voltage indoor thermostat featuring a communicating 2-wire touchscreen display, integrated relative humidity sensing, dual-stage auxiliary equipment switching, and remote WiFi monitoring via the Watts Home app.


Outdoor Snowmelt Setup:

Creatherm S45 Panels:

  • Heavy-duty, 2.8" panel engineered for under-slab and high-load applications, delivering a code-compliant R-10 insulation rating and a denser, high-PSI structure that supports 3" grid spacing and up to 3/4" PEX tubing. Built to withstand heavy vehicular traffic and frozen earth.

tekmar 654 Snow Melting Control:

  • a dedicated micro-processor-based utility controller utilizing dedicated multi-sensor inputs (ambient and slab moisture/temperature) to modulate Pulse Width Modulation (PWM) outputs or drive external line-voltage contactor panels..


Virtual Instructor-Led Training from Watts!


Introducing Virtual Instructor-Led Training (VILT) - a new technical training offering ideal for installers, facility maintenance staff, and service techs, designed to bring hands-on product expertise to wherever you are.


While delivered virtually, VILT is not a webinar! These sessions are designed to be highly interactive, instructor-led technical deep dives that focus on real-world applications. Participants learn directly from experienced Watts technical experts through live demonstations, practical examples, and interactive Q&A - it's a $199 value offered at no cost!


Find out more --> here

DON'T FORGET TO SAVE THE DATE!

Wednesday, October 21, 2026

10am-4pm

Hamburg Fairgrounds Event Center

FREE ADMISSION - FREE PARKING - HANDS-ON DEMOS - SEMINARS

Register at fmexpo.net

 

Thank you for your business!

 

Contact us at:

Albany: (518) 306-5970

Buffalo: (716) 741-9575

Syracuse: (315) 453-4230

customerservice@wmssales.com

Facebook  LinkedIn  Instagram  YouTube