BROOKHURST HOBBIES

WEEKLY NEWSLETTERS


The Weekly Updates from Brookhurst Hobbies!

Volume 3 Number 6

February 10, 2025


Executive Editor: Henry Tremblay

Managing Editor: Jon Trask

Content Contributors: Brookhurst Hobbies Staff

Week 5 - The St Scholastica Day Riot...


For me, one of the more interesting discoveries about writing this newsletter has been expanding the search for unique bits of information about a specific day that I add in to open things up here each week. Some weeks it's just completely obvious, and others require some additional searching to find a suitable couple paragraphs about something that I think will have broad interest to all of you. This February 10th gave me some challenges. I found somewhat obscure battles from various wars, the wedding of Queen Victoria...the birth of Samuel Plimsoll (who?...he's the guy who put markings on merchant ships to show their draught...)


Until I found there was a riot between drinking college students and townspeople in 1355. Showing that history truly does repeat itself...students, drinking and bad behavior aren't just a 20th century invention. So without further delay, I give you the Oxford St Scholastica Day Riots of 1355.


The St Scholastica Day riot took place in Oxford, England, on 10 February 1355, (on Saint Scholastica's Day). The disturbance began when two students from the University of Oxford complained about the quality of wine served to them in the Swindlestock Tavern, which stood on Carfax, in the centre of the town. The students quarrelled with the taverner; the argument quickly escalated to blows. The inn's customers joined in on both sides, and the resulting melee turned into a riot. The violence started by the bar brawl continued over three days, with armed gangs coming in from the countryside to assist the townspeople. University halls and students' accommodation were raided and the inhabitants murdered; there were some reports of clerics being scalped. Around 30 townsfolk were killed, as were up to 63 members of the university.


Violent disagreements between townspeople and students had arisen several times previously, and 12 of the 29 coroners' courts held in Oxford between 1297 and 1322 concerned murders by students. The University of Cambridge was established in 1209 by scholars who left Oxford following the lynching of two students by the town's citizens.


King Edward III sent judges to the town with commissions of oyer and terminer to determine what had gone on and to advise what steps should be taken. He came down on the side of the university authorities, who were given additional powers and responsibilities to the disadvantage of the town's authorities. The town was fined 500 marks and its mayor and bailiffs were sent to the Marshalsea prison in London. John Gynwell, the Bishop of Lincoln, imposed an interdict on the town for one year, which banned all religious practices, including services (except on key feast days), burials and marriages; only baptisms of young children were allowed.



An annual penance was imposed on the town: each year, on St Scholastica's Day, the mayor, bailiffs and sixty townspeople were to attend a Mass at the University Church of St Mary the Virgin for those killed; the town was also made to pay the university a fine of one penny for each scholar killed. The practice was dropped in 1825; in 1955—the 600th anniversary of the riots—in an act of conciliation the mayor was given an honorary degree and the vice-chancellor was made an honorary freeman of the city.



Pre-Orders, pre-orders, and more pre-orders headline this week. Six new Tamiya kits, Nine new Osprey Books...and a 1/8th scale Pocher are all expected in the next couple months. In store we have some new Valom kits, a cool Special Hobby kit, alongside Ryefield armor kits and some Meng Anime related kits. Along with the usual new games and CCG releases. A busy week, so let's get right into things here at the store!

Sprue Cutters Meeting - February 4th

If you're a model builder and never joined us for a sprue cutters night, what are you waiting for?

We have a great group who meet the first and third Tuesdays's of each month to socialize and work on our latest projects. It's a friendly, (and zero cost) way to share your work, see others projects and get great advice from some of the most experienced and awarded model builders in Orange County. You can even come an hour early when a group of folks always head out for dinner somewhere close to the shop. Drop by and hang out with us sometime!

Are you an aircraft model builder?


The sprue cutters group is working on a special project for the shop. Attendees are building a full squadron of B-24's to be displayed flying in the shop. Everyone is welcome to jump in and build a shop supplied kit (no painting required, that'll be step number two). Get all the details from Steve or Henry, or just join us at the next sprue cutters meeting on February 18th.

Do you follow us on social media? In addition to our newsletter our Facebook and Instagram feeds have almost daily postings of new items and restocks arriving in the shop. It's a great way to see what's hitting the shelves faster than waiting for each Monday to read this publication. And don't forget to visit the "Notes from HQ" blog on the website as well.

Facebook  Pinterest

The games sales tables at the front of the store have been restocked with a variety of great deals, including some kickstarter bundles!

And the modeling sales tables in the back have been refilled (stuffed?) with a huge number of vintage kits from collections, as well as markdowns and clearance items. Come by (while the tables are filled) and see what's been added.

 

Remember...

Gift Cards are always the right size.


Available in any denomination in store or on the website.


Buy them here!

We buy collections!


Have you visited the sale tables at the back of the store lately? New collections are constantly being added and this photo shows only a portion of what you find there on a daily basis.


And don't forget to check out the sale tables up near the front of the store as well. Two great spots to find all sorts of bargains and cool kits to work on for your next build.

Pre-Orders

Can now be found on our blog "Notes from HQ" on the website. They will still run here, but after the first appearance they will move over to the blog where you can easily find and reference them without having to scroll through the same items week after week here in newsletter. That should provide a better weekly experience for users with a easier to navigate newsletter each Monday afternoon! Let us know what you think about the new format?

 
 
 
 

Note: Expected Delivery is in Late May or Early June of 2025.


The cost of the kit is: $1199.99


To Pre-Order, a 25% deposit is required.


For more information or to Pre-Order the kit , please call the shop and ask for Steve or Louie to reserve your own.

Available for Pre-Order from Pocher


Porsche 917KH "Martini" in 1:8 Scale


Immerse yourself in the world of classic motorsport with the Pocher 1:8 scale die-cast metal model kit of the Porsche 917KH – MARTINI Edition. This officially licensed model meticulously replicates the legendary car that triumphed at the 1971 Le Mans, driven by the renowned duo of Dutchman, Gijs van Lennep and Austrian, Helmut Marko.


This exceptional kit includes over 316 high-quality pre-decorated parts, complete with over 200 screws, allowing you to construct an incredibly detailed replica. 


The model features working suspension that accurately reflects the car's legendary handling and performance on the track. It includes fully functional steering, moving doors and a clamshell engine cover, providing an interactive building experience.


The MARTINI livery is authentically represented, showcasing the striking colours and design that made the Porsche 917KH an icon of endurance racing. Perfect for both seasoned model builders and collectors, this model kit offers a rewarding challenge that culminates in a stunning display piece.

Elevate your collection with the Pocher Porsche 917KH, a true celebration of automotive excellence. Experience the legacy of this remarkable vehicle and relive the excitement of Le Mans with this exquisite model kit.


History of Porsche 917KH – 1971 Le Mans Winner – MARTINI Edition


The Porsche 917KH – 1971 Le Mans Winner – MARTINI Edition, driven by Gijs Van Lennep and Helmut Marko, is one of the most celebrated cars in racing history. At the 1971 24 Hours of Le Mans, the duo piloted the 917KH to a stunning victory, marking Porsche’s first overall win at the iconic endurance race. Powered by a 4.9-litre 12-cylinder engine and clad in the iconic MARTINI Racing livery, the 917KH's aerodynamics and speed were pivotal in overcoming challenging conditions.


Van Lennep and Marko's performance was legendary, with Van Lennep being the first Dutch winner of the 24 Hours and setting a distance record that stood for over 30 years—completing 5,335km in 24 hours. The car's lightweight design and innovative engineering made it a breakthrough in endurance racing.


The 917KH MARTINI Edition, with its distinctive racing stripes, continues to symbolise Porsche's commitment to engineering excellence and motorsport supremacy, forever immortalised in the annals of Le Mans history.


What's Inside

Plastic sprues, metal body parts, rubber tyres and decals.

Big Tamiya Pre-Order News!

We have six new kits available to order now for April delivery

 
 

Toyota GR Supra Custom


This 1/24 scale model assembly kit recreates the Toyota GR Supra Custom.

The GR Supra is a Toyota two-seater sports car released in January 2019, and plenty of custom parts called GR Parts are offered for various customizations. Components such as carbon fiber aerodynamic parts, forged aluminum wheels and sports mufflers provide superior performance. Owners can enjoy customizing this car as they like to get their ideal drive.

• 1/24 scale plastic model assembly kit. Length: 183mm, width: 85mm, height: 54mm.

• New F Parts have aerodynamic parts, and parts for trunk spoiler and wheels.

• 19-inch aluminum wheels by Toyota Racing Development (TRD) are faithfully depicted.

• New decals have realistic renderings of TRD logos for center hubs.

• Choose from Japan, U.S. and Europe versions.

• Metal transfers and masking stickers are included.


*Expected release date is Apr 15th 2025


Order Here at the Discounted Price of $37.80

Honda Prelude XX


Tamiya welcomes an updated re-issue of Item 24032 1/24 Honda Prelude XX (originally sold in 1983) with updated decals, instruction manual, packaging and transparent windshield part. November 1978 saw the debut of the Honda Prelude, a car which was in fact Honda’s first two-door model since the 1300 coupe had been released some eight years earlier. Inheriting a front engine, front-wheel drive (FF) setup, the second-generation model was released in November 1982. It further enhanced the Prelude’s trademark comfort and drivability; the first anti-lock braking system (ABS) on a Japanese car used ventilated disc brakes on all four wheels. The engine was upgraded to a 1,829cc inline-4 SOHC unit featuring Honda’s proprietary branched conduit torch system that employed a 3-valve layout for higher compression. Its low-profile hood, retractable headlights on the nose and flush surface body contributed significantly to the Prelude’s low drag and aerodynamics.

 

About the Model

• This is a 1/24 scale plastic model assembly kit. Length: 180mm, width: 82mm, height: 53mm

• The aerodynamic form of the Honda Prelude XX is authentically captured in style

• Updated decals recreate front and rear emblems, head cover’s logo, speakers and wheel centre emblems

• Transparent part recreates windscreen (this part was originally moulded in transparent brown)

• Please note that updated instruction manual has Japanese and English texts.

• Instructions depict two body colours for painting: red and a two-tone scheme navy blue and light gun metallic


*Expected release date is Apr 15th 2025


Order Here at the Discounted Price of $29.70

 
 
 

Mercedes-Benz 500 SEC


Tamiya welcomes an updated re-issue of Item 24029 1/24 Mercedes-Benz 500 SEC (originally sold in 1982) with updated decals, instruction manual and packaging. Mercedes-Benz has long enjoyed a leading position in the automotive world.


The 500 SEC made its debut as a top luxury coupe of its day in fall 1981. This car featured an aerodynamic 2-door hardtop form with four seats, and was powered by a 5-liter V8 engine which was capable of 231hp and provided a 225km/h top speed. The 500 SEC really was the complete package, offering performance, luxury and reliability, and setting the standard for its successors in all areas of the car market for years to come.


About the Model

  • This is a 1/24 scale plastic model assembly kit. Length: 209mm, width: 87mm, height: 60mm.
  • The 2-door hardtop, streamlined form of the Mercedes-Benz 500 SEC is authentically captured in style.
  • Features realistic depictions of 5-liter V8 engine and interior.
  • The engine hood is removable.
  • The drive system such as 4-wheel independent suspension and propeller shafts and chassis underside are faithfully depicted.
  • The interior has realistic renderings of details such as the instrument panel and seats.
  • Updated decals recreate instrument panel, logos, patterns of wood panels and seat surfaces.
  • Features solid synthetic rubber tires with tread patterns.
  • Instructions depict three body colours for painting: silver, white and gold.


*Expected release date is Apr 15th 2025


Order Here at the Discounted Price of $32.40

Audi Quattro


This model assembly kit is an updated re-issue of Item 24031 1/24 Audi quattro with updated decals, instruction manual and packaging. The Audi quattro played a significant role in moving four-wheel drive vehicles away from being the exclusive domain of heavy off-road cars. While the body was like the Audi Coupé, its flared fenders and spoilers front and rear hinted strongly at its high performance, but its full-time four-wheel drive was naturally the main talking point. Power was provided by a 2,144cc inline-five-cylinder engine with a turbocharger and intercooler that output an impressive 200hp. While the car itself remains an ageless classic, the “quattro” name is also still used by Audi for its four-wheel drive system.


• 1/24 scale plastic model assembly kit. Length: 185mm, width: 79mm, height: 57mm.

• Features realistic depictions of inline-5 turbo engine, suspension and 4WD drive system.

• Interior features such as seats, dashboards and shift lever are also faithfully recreated.

• Decals capture striped patterns on seats.

• Realistic synthetic rubber tires with tread patterns.

• Comes with one driver figure.

• Instructions depict four body colors for painting: silver, red, white and blue.


*Expected release date is Apr 15th 2025


Order Here at the Discounted Price of $30.60

 
 
 
 

Porsche 926C Jagermeister


This model assembly kit recreates the iconic Porsche 962C Jägermeister.

The Porsche 956 flourished at endurance races, and evolved into the Porsche 962C in 1985, being provided to many private teams. The car of Swiss racing team Brun Motorsport featured Jägermeister coloring and was victorious at World Sports Prototype Championship and German races.


• 1/24 scale plastic model assembly kit. Length: 197mm, width: 85mm, height: 44mm.

• The body is molded orange.

• The streamlined, aerodynamic form of the 1987 race car is authentically captured.

• Clear front and side windows are integrally molded with the body shell.

• Detailed depictions of suspension and cockpit.

• Includes high quality Cartograf decals which depict the many sponsor logos.

• Comes with realistic racing slick tires.


*Expected release date is Apr 15th 2025


Order Here at the Discounted Price of $29.70

French Light Tank H39


This model assembly kit recreates the French Light Tank H39 making it the fourth French subject in our 1/35 military miniature series.


Before WWII, French Army developed the H35 for the Cavalry and in 1939, the H39 appeared as the improved version of the H35. With improved cast pieces such as hull and turret, the H39 featured a 120hp engine and L/33 37mm gun, and it was in service in the German occupation of Norway in 1940. After the French surrender, German forces upgraded numerous H39 tanks and deployed them as a German tank.


• 1/35 scale plastic model assembly kit. Length: 138mm, width: 56mm.

• The complex turret is realistically depicted, and features ease of assembly facilitated by slide molding.

• Assembly type tracks have one-piece straight sections and realistic upper “sag”.

• Features a realistic depiction of the trench tail used to overcome trenches.

• Includes variant-specific cupola, visors, engine grille, idler wheels, suspension bogies and antenna base. Choose between French or German Army specification.

• Includes 1 full figure (standing French tank crew) and 1 torso (German tank crew scanning ahead from cupola).

• Metal chains are also included for the recreation of French Army tank.

• Comes with a choice of two marking options to recreate a French Army tank in 1940 and a German Army tank in 1945. A full-color painting guide is useful for camouflage painting.


*Expected release date is Apr 15th 2025


Order Here at the Discounted Price of $30.60

 
 

Osprey Publications available for Pre-Order

Roman Soldier versus Dacian Warrior


Fully illustrated, this book assesses the Roman and Dacian fighting men who clashed in three bloody encounters during the Dacian Wars of AD 85–106.

While the Roman emperor Trajan's two campaigns against the Dacian people (AD 101–02 and 105–06) are widely known, the earlier conflicts between the Dacians and their Roman neighbours are also important. Drawing upon the latest research and findings, this fully illustrated study investigates the emperor Domitian's Dacian war (AD 86–88) as well as Trajan's campaigns.


Inhabiting an area of Europe from the Tisza River to the Black Sea, the Dacians mounted raids into Roman territory throughout the 1st century AD. In 85 Dacian forces invaded Roman territory; after defeating the invaders, the Roman Army moved into Dacia. Distracted by other crises, Domitian made peace and Dacia became a client kingdom of Rome.


In AD 101, the emperor Trajan launched a pre-emptive strike on Dacia, prompting the Dacians to sue for peace in 102. In 105, Trajan's troops commenced a new campaign; the Romans besieged the Dacian capital, Sarmizegetusa. After the Dacian king committed suicide, a new Roman province of Dacia was established.


Featuring specially commissioned full-colour artwork and mapping, this study pits the might of the Roman Army against the formidable Dacians, showing how the fighting men of both sides adapted their tactics and technologies as the fighting progressed.


Pre-Order Here for March 4th Delivery

Mukden 1905


A compelling narrative of the largest land battle of its time, and the decisive engagement of the Russo-Japanese War.

Mukden stands out as the most significant battle of the Russo-Japanese War. By February 1905, the conflict had reached its culmination, as Port Arthur had fallen to the Japanese after an epic six-month siege. Now free to mass all his field armies, Japanese commander Marshal Oyama shifted his focus to the Russian forces assembled around the city of Mukden. The Russians, led by General Kuropatkin and numbering over 300,000 men, had finally achieved sufficient strength to conduct their own offensive. A Russian victory would be vital to save both deteriorating morale in the army, as well as to reassure the home front.


This fascinating work documents the decisive set-piece battle between the opposing sides on the plains and hills of Manchuria. Maps, diagrams, battlescene artwork and period photos bring to life the brutal clash, the largest battle in history up to that point. Exploring the unabated fighting across a 90-mile-long front in the depths of winter, John Valitutto considers the effectiveness of each armies' manoeuvres, the trench warfare that prefigured World War I, and the influence of machine guns and massed heavy artillery on the battle's outcome. Mukden made it clear to all that the conduct of war was changing, with new technologies and tactics demonstrating their terrible potential to the world.


Pre-Order Here for March 4th Delivery

Royal Navy Grand Fleet 1914-1918


World War I was Britain's last moment as the world's naval superpower, and its Grand Fleet was then the most powerful ever seen. Fully illustrated, this explores its fighting power.


At the start of World War I, the Royal Navy's forces were amalgamated into a single entity, the Grand Fleet, and stationed in Scapa Flow, Orkney. The Grand Fleet was the largest amalgamation of modern naval power the world had seen, with over 30 dreadnought battleships or battlecruisers, and a plethora of cruisers and destroyers. In 1917 it was reinforced further by a powerful American squadron.


In this book, based on extensive primary source research, naval expert Angus Konstam assesses the Grand Fleet's ships, technology, organization, command and intelligence, and how it fought. While ship-for-ship its German counterparts were better designed, as a combined fleet Admiral Jellicoe's armada was unstoppable. It took part in several clashes with its German foe during the war, but it was only at the Battle of Jutland, in 1916, that Jellicoe finally had the chance to destroy the enemy.



Although the High Seas Fleet deftly avoided the trap laid for it, the Grand Fleet's economic blockade then really began to bite, which led to Germany's surrender in November 1918. Packed with battle diagrams, spectacular artwork, and archive photos, this book is an essential guide to the last time the Royal Navy would be indisputably the world's most powerful.


Pre-Order Here for March 4th Delivery

Second Arakan

1943-44


A detailed examination of one of the crucial campaigns of World War II in Burma, in which British and Commonwealth forces achieved their first decisive victory over Japanese arms.


The hard-fought Second Arakan campaign was a second attempt by Allied arms to advance in the coastal Arakan region in western Burma, following a failed first effort in early 1943. The battles fought shattered the myth of Japanese invincibility that had for over two years crippled the Allied cause, and for the first time offered the prospect of successful offensive operations against the Japanese in Burma.


Military historian Tim Moreman examines the wide range of actions that made up the Second Arakan campaign, from XV Indian Corps' initial push down the Burmese coast towards Akyab Island, to the key events of the major Japanese Ha-Go operation launched by Twenty-Eighth Army. These include the Battle of the Admin Box near Sinweyza, where the surrounded 7th Indian Division inflicted a serious defeat on the Japanese 55th Division; the reinforcement of Imphal and Kohima; and the seizure of Razabil, the Tunnels and Point 551 between March and May 1944.


Packed with maps, diagrams, battlescene artworks and photographs that guide the reader through this complex campaign in easy to follow detail, this work provides a must-have illustrated companion to this decisive victory for British and Commonwealth arms over the Imperial Japanese. Army.


Pre-Order Here for March 4th Delivery

The German Navy 1935-45


An illustrated study of the uniforms and personal equipment worn by the personnel of the Kriegsmarine, the German Navy of the Third Reich, from 1935–45.


Founded in defiance of the Treaty of Versailles, the Kriegsmarine was established in 1935 and reached a peak strength of more than 800,000 personnel in 1944. Its original aim of amassing a surface fleet on parity with Great Britain's Royal Navy shifted with the outbreak of World War II, after which focus moved to submarine warfare, with the Kriegsmarine's U-boats exacting a heavy toll on Allied shipping across the globe. Meanwhile, several of its formidable capital ships – notably the Graf Spee, Bismarck, Tirpitz, Scharnhorst and Gneisenau – saw widespread action as Nazi Germany strove to defeat the Allies at sea.


In this new study, Nigel Thomas examines the evolving organization, uniforms and equipment used by the Kriegsmarine during its ten-year existence, spanning its pre-war beginnings, the invasion of Norway in 1940, and through to the deployment of Kriegsmarine personnel as grounds troops from 1943–45. The different gear worn by its various branches of service is described in detail and illustrated with newly commissioned colour artwork and an array of specially selected photographs.


Pre-Order Here for March 4th Delivery

B-26 Marauder

vs Me262


An illustrated account of the clashes between the Luftwaffe's Me 262, the first operational jet fighter, and the USAAF's B-26 Marauder bomber during the final months of the war in Europe.


As the world's first jet-engined fighter aircraft, the Luftwaffe's Messerschmitt Me 262 heralded a new dawn in design, performance, and combat capability upon its operational debut in 1944, outclassing its Allied counterparts for both speed and firepower. The skies over Austria and southern Germany saw the Me 262 enter savage aerial clashes as fighter ace Adolf Galland's JV 44 engaged three USAAF bomber groups, targeting their formidable – but ill-prepared – Martin B-26 Marauders with often devastating results.


In this dramatic new study, Luftwaffe historian Robert Forsyth examines how USAAF crews in twin-engined Marauders endeavoured to fulfil their bombing missions while jet pilots in Me 262s attacked with 30 mm MK 108 nose-mounted cannon and, eventually, 55 mm R4M air-to-air rockets. First-hand accounts, newly commissioned artwork and archive photography enhance the fascinating and action-packed story of these two aircraft and the fearsome combat that was waged between them.


Pre-Order Here for March 4th Delivery


Hurtgen Forest 1944 (1)


The first part of a detailed study of one of the longest, and most brutal, tactical operations of World War II.


In September 1944, the Allied High Command continued to press eastwards towards the Rhine, the thrust being spearheaded by Courtney Hodges' US First Army, whose proposed line of advance was through a wooded area south of Aachen, known locally as the Hürtgenwald – or Hürtgen Forest. On the opposing side, the German forces under the overall command of Walter Model would do all they could to defend the Reich, but also maintain a staging post for the forthcoming Battle of the Bulge.

Fought in brutal terrain – heavily wooded, riven with razor sharp ridgelines and precipitous cliffs, and with a woefully inadequate road network – and in all elements, the Battle of Hürtgen Forest was a grinding and protracted encounter where gains were measured in feet and yards and not miles.


This study explores the first phase of this bloody battle, including the 'Aachen Question' facing the Allies. Featuring stunning artwork, detailed maps and diagrams, and period images, this book provides a gripping narrative of the infamous clash in the Hürtgen Forest, concluding with an assessment of the situation in November 1944, and the preparations for the next phase of operations.


Pre-Order Here for March 4th Delivery


German Troops in the American Revolution (2)


Fully illustrated, this is the second volume in a detailed study of the German auxiliary troops who fought for Britain in the American Revolutionary War.

During the American Revolutionary War (1775–83), German auxiliary troops provided a vital element of the British war effort. While the largest body of German troops was from Hessen-Cassel (see the first volume of this study), the British also fielded troops from Braunschweig-Wolfenbüttel, Hessen-Hanau, Waldeck and Pyrmont, Brandenburg Ansbach and Brandenburg-Bayreuth, and Anhalt-Zerbst. This volume also covers the Hanoverian soldiers involved in the sieges of Gibraltar and Menorca.


Fighting on a host of battlefields from Saratoga to Yorktown, these hired soldiers provided the Crown Forces with much-needed manpower and contributed crucial combat skills in the form of the Jäger, renowned specialists in open-order warfare. Featuring eight specially commissioned artwork plates and an array of carefully chosen illustrations, many in colour, this lively study examines the organization, uniforms, weapons and equipment of these troops who fought for King George in the New World.


Pre-Order Here for March 4th Delivery


Upcoming Store Events

Also in the Brookhurst Club


February 14th - Friday Night Magic Booster Draft - 7:00pm

February 15th - Saturday Games Workshop Gaming Club - 1:00pm

February 18th - Sprue Cutters - 6:00pm

February 19th - D & D Night at the Club - 6:00pm

February 21st - Friday Night Magic Booster Draft - 7:00pm

February 26th - D & D Night at the Club - 6:00pm

February 28th - Friday Night Magic Booster Draft - 7:00pm

March 1st - Saturday Games Workshop Gaming Club - 1:00pm

March 4th - Sprue Cutters - 6:00pm

March 5th - D & D Night at the Club - 6:00pm

March 7th - Friday Night Magic Booster Draft - 7:00pm

March 12th - D & D Night at the Club - 6:00pm

March 14th - Friday Night Magic Booster Draft - 7:00pm

March 15th - Saturday Games Workshop Gaming Club - 1:00pm

March 18th - Sprue Cutters - 6:00pm

March 19th - D & D Night at the Club - 6:00pm

March 21st - Friday Night Magic Booster Draft - 7:00pm

From Valom

1/72 Grumman J2F-2/JF2F-2A Duck

In Stock Now!

Grumman J2F-2/J2F-2A


A number of Valom 1/72nd scale kits arrived from Czechoslovakia, including a couple F-101's, a couple Avro Ansons and this reboxed Duck WWII era float plane.


The Model

Introducing the 1/72nd scale Grumman J2F-2/J2F-2A plastic kit from Valom! 


[Mold Color]: Gray


[Includes]: Plastic kit, resin parts, photo-etched parts, decal sheet, instruction manual

Get ready to build and customize your very own Grumman J2F-2/J2F-2A with this comprehensive kit.


The Aircraft

The Grumman J2F Duck was an American multirole seaplane in a fixed, float, and fixed undercarriage from the interwar period and World War II. A prototype flight took place in 1933, and the machine entered the line in 1936. The plane - in the J2F-6 version - was 10.37 meters long with a wingspan of 11.9 meters. The drive was provided by a single 900 HP Wright R-1820-64 engine. The maximum speed of the aircraft reached 304 km / h. The deck armament consisted of one 7.62 mm Browning machine gun. The machine could also take a load of bombs weighing up to approx. 295 kg.


The Grumman J2F Duck was one of the most widely used American seaplanes during World War II, as it served not only in the US Navy, but also in the US Coast Guard, US Marine Corps and the US Air Force. Its main tasks included carrying out transport tasks, but also carrying out observation and reconnaissance missions, ZOP (anti-submarine combat), rescue and photographic reconnaissance missions. Grumman J2F planes also took an active part in World War II in the Pacific, especially in 1941-1942. In the course of production, several development versions of this very successful aircraft were created, for example: J2F-2 (version for the US Marine Corps), J2F-5 (version of the F-2, but with a more powerful engine), J2F-6 (version with the Wright R -1820-64) or OA-12 (rescue version for the Air Force).


Grumman J2F Duck

MSRP $35.00

Our Price: $32.39

Click here to see it on our website

From Special Hobby

1/48 Airspeed Oxford Mk.1 - "Gunner Trainer"

In Stock Now!

Airspeed Oxford Mk.1 Gunner Trainer


Not a new kit but one that we haven't had in the store for a while. Chosen for somewhat personal reasons this week. I saw a fully restored Oxford on my last trip to the UK at the RAF Museum. So, I've included a couple of my own photos down near the bottom.


The Model

This model kit of the Airspeed Oxford Mk.I gunner trainer aircraft from Special Hobby comes with resin parts, photo-etched parts, paint mask stickers, and decals for four versions: U.K, Canada, New Zealand and Norway. Models & Model Kits are supplied unpainted and unassembled unless otherwise noted.


The Airspeed Oxford was a British aeroplane developed early in the war and mainly used in training of multi-engine aircraft crews – pilots, navigators, gunners. The Oxfords saw service with the RAF as well as with air forces of other Commonwealth countries (RNZAF, RCAF, RAAF and SAAF). In the post war years, many Oxfords were also delivered to even more other countries. The Mk.I version of the Oxford was produced with the dorsal gun turrent and was mainly used for gunnery training.


   And this is the version that our model represents. The styrene parts come with resin items and etches, and the decals offer markings for war time machines operated by the RAF, RNZAF and RCAF and a post war, yellow and blue machine of the RNAF – Royal Norwegian Air Force.

  - Etches and resin cast parts already in the box


The Aircraft

The Airspeed AS.10 Oxford is a twin-engine monoplane aircraft developed and manufactured by Airspeed. It saw widespread use for training British Commonwealthaircrews in navigation, radio-operating, bombing and gunnery roles throughout the Second World War.


The Oxford was developed by Airspeed during the 1930s in response to a requirement for a capable trainer aircraft that conformed with Specification T.23/36, which had been issued by the British Air Ministry. Its basic design is derived from the company's earlier AS.6 Envoy, a commercial passenger aircraft. After its maiden flight by Percy Colman on 19 June 1937, it was quickly put into production as part of a rapid expansion of the Royal Air Force (RAF) in anticipation of a large-scale conflict.


As a consequence of the outbreak of war, many thousands of Oxfords were ordered by Britain and its allies, including Australia, Canada, France, New Zealand, Poland, and the United States. Following the end of the conflict, the Oxford continued to achieve export sales for some time, equipping the newly formed air forces of Egypt, India, Israel, and Yugoslavia. It was considered to be a capable trainer aircraft throughout the conflict, as well as being used as a general-purpose type. A number of Oxfords are preserved today on static display worldwide.



Airspeed Oxford Mk.1

MSRP: $71.99

Our Price: $64.79 

Click here to see it on our website

From Ryefield Models

1/35 Pz.Kpfw.IV Ausf.H Late Production

In Stock Now!

Pz.Kpfw. IV H


A few new Ryefield kits in the store this week. Including this very interesting and detailed Panzer IV.


The Model

Plastic model kit of a Panzerkampfwagen IV Ausf. H late version

  • Scale 1:35
  • Metal gun barrel
  • 3 different muzzle brakes
  • including Maybach HL 120 TRM engine
  • Photo-etched parts included
  • Workable individual link tracks
  • 2 different idler types
  • 4 different support roller types
  • Hatches can be built open or closed
  • Unbuilt, unpainted
  • Glue and paint not included

April 1943 saw the start of deliveries of the "Version H", in which the long KwK 40 L/48 was fitted as standard. The front basic armouring of the hull was now 80 mm. The vehicles were delivered with side skirts as standard. These were 5 mm thick plates which were removable from the hull and fixed to the turret and protected against anti-tank shells. The side slits on the turret for gunners and loaders were omitted as they had lost their function anyway due to the attached skirts.


About Vehicle

The Panzerkampfwagen IV (Pz.Kpfw. IV), commonly known as the Panzer IV, is a German medium tank developed in the late 1930s and used extensively during the Second World War. Its ordnance inventory designation was Sd.Kfz.161.

The Panzer IV was the most numerous German tank and the second-most numerous German fully tracked armoured fighting vehicle of the Second World War; 8,553 Panzer IVs of all versions were built during World War II, only exceeded by the StuG III assault gun with 10,086 vehicles. Its chassis was also used as the base for many other fighting vehicles, including the Sturmgeschütz IV assault gun, the Jagdpanzer IV self-propelled anti-tank gun, the Wirbelwind and Ostwind self-propelled anti-aircraft gun, and the Brummbär self-propelled gun.


The Ausf. H, began production in June 1943 and received the designation Sd. Kfz. 161/2. The integrity of the glacis armour was improved by manufacturing it as a single 80-millimetre (3.15 in) plate. A reinforced final drive with higher gear ratios was introduced. To prevent adhesion of magnetic anti-tank mines, which the Germans feared would be used in large numbers by the Allies, Zimmerit paste was added to all the vertical surfaces of the tank's armour. The turret roof was reinforced from 10-millimetre (0.39 in) to 16-millimetre (0.63 in) and 25-millimetre (0.98 in) segments. The vehicle's side and turret were further protected by the addition of 5-millimetre (0.20 in) hull skirts and 8-millimetre (0.31 in) turret skirts. This resulted in the elimination of the vision ports located on the hull side, as the skirts obstructed their view. During the Ausf. H's production run, its rubber-tired return rollers were replaced with cast steel, a lighter cast front sprocket and rear idler wheel gradually replaced the previous components, the hull was fitted with triangular supports for the easily damaged side skirts, the Nebelwurfgerät was discontinued, and a mount in the turret roof, designed for the Nahverteidigungswaffe, was plugged by a circular armoured plate due to initial production shortages of this weapon.


These modifications meant that the tank's weight increased to 25 tonnes (27.56 short tons). In spite of a new six-speed SSG 77 transmission adopted from the Panzer III, top speed dropped to as low as 16 km/h (10 mph) on cross country terrain. An experimental version of the Ausf H was fitted with a hydrostatic transmission but was not put into production.

(Information via Wikipedia)


Panzer IV H

MSRP $63.00

Our Price: $56.70 

Click here to see it on our website

From Meng

Evangelion Test Type-01 ver.1.

In Stock Now!

 

Evangelion Type-01


From Meng comes this 18.5" tall Evangelion Type-01 Kit from the Rebuild of Evangelion Film Series. A number of new Meng and Bandai kits are in the shop and out on the floor already.


The Model

The Ver.1.5 Multi-Color edition of Meng's "Evangelion" Type-01 model kit is made with multi-color runners for easy assembly, with multicolor molding undergate as well! Specially designed LED light-up parts are included, so the eyes can light up and the core can blink -- the lighting is turned on and off by attaching and detaching the entry plug. It'll be highly posable after assembly, too, and its assertive 47cm size will make it a standout on your shelf! The progressive knife and pallet rifle are included, as are 17 interchangeable hands!

An impressive 18.5" Tall when assembled!



The Character

Official name

Multipurpose Humanoid Decisive Weapon, Artificial Human Evangelion Test Type-01. ("General-Purpose Humanoid Battle Weapon Android Evangelion Test First Unit")

Evangelion Test Type-01 is the first non-prototype Evangelion unit ever made. While its armor is very similar in structure to the one of the prototype, Evangelion Unit-00, it has several features which make this Evangelion the first to be properly able to battle an enemy.


Unit-01's armor is mainly purple with numerous glowing green details throughout its body. Other components are colored golden yellow, gray and black. The diamond-shaped shoulder parts of the armor also glow. Its distinctive helmet, with its prominent horn and oversized chin, makes the Eva dinosaur-like in appearance, almost evocative of the Ceratopsidae family of dinosaurs.


The Core of the Eva is located of its chest. It is protected by both a dedicated black plate and the chest plates of the armor. The latter's are very different from those seen on any other Eva, while being very reminiscent of the armor of the Unit-00. They have a protrusion on each side of the chest which moves along with the Evangelion, allowing both smooth movements and maximum protection of the Core.


The Unit-01 is also the first Evangelion to be equipped with shoulder pylons. Later Production Models have these much smaller in size.


The humanoid entity beneath the armor has a very light, almost white, skin. Its blood is identified as type "Blue A*", a reference to the Evangelion being derived from Angels.


Evangelion Type-01

MSRP: $225.99

Our Price: $203.39

Click here to see it on our website

From Ammo

Oilbrushers in a variety of colors

In Stock Now!


Ammo Oil Brushers


We've received some of the great new Ammo Oil Brushers in good quantities of all colors.


This unique range of Oilbrusher painting and weathering sets offers the convenience and accuracy that you expect from AMMO. Oilbrusher is the innovative oil paint with built-in applicator brush; this unique and innovative AMMO feature ends the need to clean up messy oils after each use. The modern container also includes the dispenser–cleaner system which removes access paint from the brush. This revolutionary design saves both product and cost, while offering a clean and simple to use alternative to traditional oils which are both expensive and inconvenient. Oilbrushers are specifically formulated for modeling use. This means that your oils are diluted to the perfect consistency to be applied directly onto your model for a glaze free finish. No longer do you need to place the oil paint onto a pallet or piece of carboard when painting, eliminating time waisted preparing and cleaning.


Ammo Oil Brushers

Our Price: $4.99 each 

Click here to see it on our website

From Bandai

The Gundam Card Game

Details Announced

Pre-order Information Coming Soon!

The Gundam Card Game is now slated for a July 11th release. There will be four starter decks released simultaneously. We will provide a peek at each one below. There will also be releases of card cases, card sleeves and dice. We will cover all of those and more in greater detail as we continue to receive updates.


For the Beta Event on February 22nd, it can only be registered for via the Bandai TCG Website, not here in the store. As of today, all slots are allocated by Bandai, and the registration is closed on their site.


If we have any additional updates we will add them as soon as they come available.

Heroic Beginnings

Starter Deck ST01


x1 Ready-to-play 50-card deck

x10 Resource Cards

x8 Token Cards

x1 Paper Damage Counter

x1 Rule/Playsheet

x1 Bonus Pack

Wings of Advance

Starter Deck ST02


x1 Ready-to-play 50-card deck

x10 Resource Cards

x8 Token Cards

x1 Paper Damage Counter

x1 Rule/Playsheet

x1 Bonus Pack

Zeon's Rush

Starter Deck ST03


x1 Ready-to-play 50-card deck

x10 Resource Cards

x8 Token Cards

x1 Paper Damage Counter

x1 Rule/Playsheet

x1 Bonus Pack

Seed Strike

Starter Deck ST04


x1 Ready-to-play 50-card deck

x10 Resource Cards

x8 Token Cards

x1 Paper Damage Counter

x1 Rule/Playsheet

x1 Bonus Pack

From Cmon

Nova Era

In Stock!

Nova Era


A Civilization-Building Game for the Whole Family

Human civilization has taken many forms. Now, you can be in charge of one. But be warned. There are other civilizations, worldwide Disasters, and Dark Ages. How will you grow your Civilization?


In Nova Era, players develop their civilization by expanding their territories, enlisting famous personalities, and researching technologies to become the most advanced civilization. But watch out for disasters, social unrest, and decisions that may cause a Dark Age!


Only the smartest Ruler will create the most successful civilization!


Nova Era

MSRP: $34.99

Our Price $31.49

Click here to see on our website

Update:

For those of you waiting for the upcoming "Warlord: Saga of the Storm", there's been a production delay from the manufacturer in China. So Kingswood Games has opted to push back the release date to sometime between May and July of this year to be assured the quality is up to their standards. More news about a specific date within that window of time whenever we are updated.

From Space Cowboys

Shadow Theater:

The Legend of the Monkey King

In Stock!

Shadow Theater: The Legend of the Monkey King


In The Shadow Theater, collect peaches and jades, move the Monkey King, and use the dragon's weapons.

 

Thwart your opponent with cunning to achieve victory.


Dragon Weapons

You can also play Dragon Weapon cards that will surprise your opponent. 

They become either power cards or victory points at the end of the round.


Monkeys

Use your Monkeys to trigger the power of a theater area! 

Take turns performing an action by placing 1 Monkey on 1 location on the board OR by collecting all the Monkeys present in 1 location. Monkeys and Jades earn points under certain conditions.


Parchments

Change your strategy! 

Most Parchment tiles have effects that can be used  at the same time as an action. You are free to take advantage of them or not each time

times they are applicable, and even several times during

of the same sleeve if you wish. These effects are added

to the usual effects of the places.


Victory

If a resource type (Dragon Weapons,  Monkeys, Jades, or Peaches cards) from the reserve becomes  exhausted, end your turn normally. The round  then ends.

Win 2 rounds and forge your legend! 





Shadow Theater

MSRP: $24.99

Our Price $22.49

Click here to see on our website

From Osprey Publications

USN PT Boat vs IJN Destroyer:

Tokyo Express 1942–43

Pre-Order for March 4th!

USN PT Boat vs IJN Destroyer


This fully illustrated book assesses the trial of strength between US Navy PT boats and Japanese destroyers operating in the Solomon Islands during 1942–43.


During the Solomons fighting, the IJN was forced to rely on destroyers to move men and materiel to its forward garrisons. Conducted at night to avoid American air power, these missions, first seen during the struggle for Guadalcanal, were dubbed the Tokyo Express. Unable to derail the Tokyo Express by using its destroyers, the USN deployed PT boats off Guadalcanal from October 1942; sinking one destroyer and damaging another.


As the fighting moved into the Central Solomons, the USN attempted to disrupt the build-up of Japanese forces on New Georgia Island and other Japanese strongholds by using cruisers and destroyers, but this approach resulted in heavy losses. PT boat operations were increasingly important after the Japanese turned to barges to move troops and supplies.


Full-colour artwork and mapping and carefully chosen archive photographs complement vivid battle narratives and shrewd analysis in this lively account of the ships and men fighting on both sides in the crucial Solomon Islands campaign at the height of World War II. Renowned authority Mark Stille explores the background to this epic clash of arms, charts its course during 1942–43, and offers insights into the performance of both sides in this pivotal campaign of World War II in the Pacific.


* Pre-Order for March 4th Delivery


USN PT Boat vs IJN Destroyer

MSRP: $23.00

Our Price $18.40

Click here to see on our website

 

Quick Hits

and

Upcoming Items


Expected Soon!


ICM 1/48 MH-60L Black Hawk, US Special Forces Helicopter (100% new molds)


History

At the end of 1968, the US Army issued contracts to several companies to conduct research on a program to create a multi-purpose tactical transport helicopter for amphibious operations and cargo delivery. The program was called UTTAS (Utility Tactical Transport Air System), and it specified the following requirements: a crew of three, transportation of 11-15 soldiers in the cockpit, a power plant with two engines, and the ability to transport the helicopter itself inside transport aircraft. Of the nine companies that submitted designs for the UTTAS helicopter, the U.S. Department of Defense selected two - Boeing-Vertol and Sikorsky. In 1976, after completion of the tests, the Army selected Sikorsky as the winner of the UTTAS program, and a contract was signed for the production of the first batch of helicopters, which received the Army designation UH-60A Black Hawk (the series designation is Sikorsky S-70).


Characteristics of model

Length - 421 mm

Height - 111 mm

Rotor diameter - 343 mm

Number of parts - 302 pcs


Features of model

- 100% new molds for ICM’s first Black Hawk family helicopter

- The model is reproduced with proportions corresponding to the real example

- High level of detail in all elements

- Dual aerial refueling system options, and configurable troop compartment with removable seats

- Includes decals for three marking variants

Expected in Late Feb or early March


MiniArt 1/48 P-47D-26RA Thunderbolt. Advanced Kit


Expected in April


Border Model 1/35 Sd.Kfz.251/22 w/7.5cm PaK 40 'Pakwagen' (w/type D Latest Feature)

Expected in this month!


Arma Hobby 1/48 P-39 Airacobra Recon


Expected in August


Aoshima

1/24 Movie Mecha#BT-03 Time Machine from Back To The Future Part Ⅲ

The Pokemon Company International will release Lillie Premium Tournament Collection, for Pokemon TCG, on April 25, 2025.


Trainers can experience the strength Lillie has in the bonds with her Pokemon in this new collection.


The set comes with a foil promo card of Lillie’s Clefairy ex as well as 3 foil Pokemon Tool cards featuring Lillie's Pearl. The collection also contains 65 card sleeves, a sturdy deck box, a large metallic coin, a photo sticker featuring Lillie, 2 coin condition markers, and 6 tournament-ready damage dice.


And to power up decks, it comes with 6 Pokemon TCG booster packs, and a code card for Pokemon TCG Live.

Atomic Mass Games will release two new Star Wars: Shatterpoint Squad Packs and a Mission Pack on April 4, 2025.


The first Squad Pack, Deploy the Garrison, features Director Krennic from Rogue One: A Star Wars Story. He arrives on the scene with three Death Troopers and two Shore Troopers in tow. This set comes with 6 miniatures, 4 Unit Stat cards, 4 Stance cards, 4 Order cards, and an insert.


The second Squad Pack, All the Way, showcases some Rebel characters from Rogue One: A Star Wars Story. It includes Cassian Andor, K-250, and Rebel Pathfinders. The set comes with 4 miniatures, 3 Unit Stat cards, 3 Stance cards, 3 Order cards, and an insert.


The new Mission Pack, First Contact, is Clone Wars-themed. It adds new layouts and struggle cards to the mix. The box includes a punchboard, a mission card and 9 Struggle cards.

Black Powder and Brimstone RPG (Mork Borg)


Coming March 18th

FREE LEAGUE PUBLISHING

A grimdark fantasy RPG, compatible with MORK BORG Embark on a dark and daring adventure where death and destruction lurks around every corner.


The gunpowder and witchcraft infused game is a complete stand-alone RPG based on and compatible with the multi-award-winning apocalyptic heavy metal RPG MORK BORG. This action packed, rules light, art heavy OSR game offers swashbuckling adventure and gothic folk horror in an unholy blend. Key Features: A wicked cauldron of a game packed to the brim with lore, explosions, magic, war, and demons.


Be a desperate adventurer stuck in the middle of the conflict desperately trying to survive, and maybe even profit, amongst the chaos and destruction. Wield unique and characterful weapons, each with their own rules and advantages on top of the damage die. Use forbidden and powerful magics that can warp reality as easily as an artist paints a canvas. A treasure chest of character options, items, locations, adventures, and enemies both human and monstrous waiting to be opened.

 

Remember...

Gift Cards are always the right size.


Available in any denomination in store or on the website.


Buy them here!

Issue 6 of our weekly newsletter for 2025.


Six weeks into 2025? Wasn't just the holidays?


Pretty crazy year so far, tons of new and restock products coming in. Lots of pre-orders landing for items that look like they will be in demand. More and more of the pre-orders are being cross-posted onto the website blog to make them easy to find. And our social media feed has picked up on Facebook and Instagram to give you overviews of new stock as it arrives and is put out into the store.


We hope you're enjoying the changes and finding them helpful and informative. We would love to hear your thoughts on the evolution of our newsletter and social media, and we hope that you're subscribed to all of them to get the best nd most up to the minute information from the store.


The Brookhurst Club remains on its usual schedule. Don't forget that there's a Sprue Cutters meeting at 6pm on the first and third Tuesdays of each month (the next one be held, February 18th at 6:00pm): and the AMPS meetings are on held on the second Saturday of each month March 8th, will be the next one). We have regular Magic groups, D&D groups, Miniatures gaming and other events held in the Brookhurst Club. Ask us about joining in to any one of our gaming groups!


Remember that we are always seeking submissions to "What are you working on" which we plan to feature weekly whenever possible.


We welcome any suggestions, comments and even corrections to the newsletter! Drop us an e-mail to info@brookhursthobbies.com or come in to the shop sometime and chat with us in person.


From all of us here at Brookhurst Hobbies...

Thanks for reading, and we hope to see you soon!


Regards,

Jon Trask

Brookhurst Hobbies

Facebook  Pinterest

www.brookhursthobbies.com | 714-636-3580 | info@brookhursthobbies.com


Brookhurst Hobbies 12188 Brookhurst Street, Garden Grove, CA 92840